ADP2302ARDZ-2.5-R7

The ADP2302/ADP2303 are fixed frequency, current mode control,Step-down DC-DC regulator, integrated power MOSFETs operating from 3.0 V to 20 V input voltages for a variety of applications. The adjustable version can output down to 0.8 V, while the fixed output version offers preset output voltage options: 5.0 V, 3.3 V, and 2.5 V. The 700 kHz operating frequency allows the use of small inductors and ceramic capacitors, providing a compact solution. Current mode control provides fast, stable line and load transient response. The ADP2302/ADP2303 have integrated soft-start circuitry to prevent large inrush currents at power-up. A power good signal allows power sequencing of devices with an enable input. The ADP2302/ADP2303 have a precision enable pin threshold voltage, making it easy to sequence these devices with other input/output supplies. Other important features include undervoltage lockout (UVLO), overvoltage protection (OVP), thermal shutdown (TSD), and overcurrent protection (OCP).

The ADP2302/ADP2303 are available in an 8-lead SOIC package with exposed pads and are specified over the −40°C to +125°C junction temperature range.

apply

• Intermediate power rail conversion
• DC-DC terminal load applications
• Communications and networking equipment
• Industrial and instrumentation
• Healthcare
• Consumer electronic devices

• Advantages and features

  • Wide input voltage range: 3.0 V to 20 V
  • Maximum load current: 2 A (ADP2302)
  • Output accuracy: ±1.5% over temperature
  • Output voltage as low as 0.8 V
  • 700 kHz switching frequency
  • Current-mode control structure
  • PFM/PWM mode is switched automatically
  • Precision enable pin with hysteresis

  • Integrated high-end MOSFETs
  • Integrated bootstrap diode
  • Internal compensation and soft start
  • Power good output
  • Undervoltage lockout (UVLO)
  • Overcurrent Protection (OCP)
  • Thermal Shutdown (TSD)
  • 8-pin SOIC package with exposed pad
  
  //www.chip100.com/