ADuM3160是一款采用ADI公司
iCoupler® 技术的
USB port isolator，它将高速CMOS工艺与单片空芯变压器技术相结合，可提供优异的工作性能，并且很容易与低速和全速USB兼容外设集成。
Many microcontroller implementations of USB only provide D+ and D− lines to the external pins. This is in many cases where it requires minimal external components and simplifies the design; However, this poses a challenge when isolation is required. Because the USB line must switch between actively driving D+/D− and allowing an external resistor to set the bus state, the ADuM3160 fabric can both detect data flow and control the state of the output buffer. The data flow direction is determined by grouping.
The ADuM3160 combines edge detection-based iCoupler technology with internal logic to enable a transparent, easy-to-configure, upstream-facing port isolator. Isolated upstream ports offer several advantages such as simple circuitry, power management and robust operation.
The propagation delay of this isolator is comparable to that of standard hubs and cables. It can be powered from a supply voltage of 3.0 V to 5.5 V on either side and can be internally regulated to the signal level for direct connection to the VBUSx. The ADuM3160 isolates the pull-up resistor so that the peripheral can control the connection timing. The device has a very low current in the idle state, so it does not require a suspended state.
应用