APEK8582KLP-05-MH

• Product introduction

A8582is an adjustable frequency, high output current PWM regulator that incorporates low resistance, high-side, N-channel MOSFETs. The A8582 integrates current-mode control to provide simple compensation, excellent loop stability, and fast transient response. The A8582 utilizes external compensation to be compatible with a wide range of power components to optimize transient response without compromising stability.

The A8582 adjusts input voltages from 4.7 to 36 V, providing output voltages as low as 0.8 V and load currents of at least 2.0 A. Features of the A8582 include an externally adjustable switching frequency, an externally set soft-start time to minimize inrush current, an EN/SYNC input that enables VOUT and/or synchronizes the PWM switching frequency, and a power supply good (POK) output that indicates VOUT is within regulation. The A8582 turns on the low-side FETs to charge the boost capacitor only when needed, rather than every PWM cycle. This improves light load efficiency and provides no-load current as low as 4 mA at 2 MHz. The A8582 control circuit draws less than 3 μA in sleep mode.

Protection features include VIN undervoltage lockout (UVLO), pulse-by-pulse overcurrent protection (OCP), hiccup mode short-circuit protection (HIC), overvoltage protection (OVP), and thermal shutdown (TSD). In addition, the A8582 offers unique diode (D1) loss protection, open and adjacent pin short-circuit protection, and short-to-ground protection on each pin to meet the most demanding applications.

The A8582 is available in a 16-pin TSSOP package with an exposed heatsink for enhanced cooling. The package is lead-free and features 100% matte tin leadframe plating.

apply

• GPS/infotainment system
• Car audio
• Home audio
• Networking and telecommunications
• • Wide operating voltage range: 4.7 to 36 V
  • UVLO stop threshold of 3.8 V typical
  • Supports 40 V input for surge and dump testing
  • It is capable of delivering at least 2.0 A of steady-state output current
  • The adjustable output voltage is as low as 0.8 V
  • Internal 70 mΩ high-side switching MOSFETs
  • Adjustable switching frequency, fSW: 0.25 to 2.4 MHz
  • Synchronization to external clock: 1.2 × fSWto 1.5 × fSW
  • The sleep mode supply current is less than 3 μA
  • Externally set the soft-start time via the SS pin
  • Very low no-load current, typically 3.5 mA
  • Compatible with pre-biased startup
  • Power Supply Good (POK) output
  • Pulse-by-pulse current limit (OCP)
  • Hiccup Mode Short Circuit Protection (HIC)
  • Over Temperature Protection (TSD)
  • Overvoltage Protection (OVP)
  • The asynchronous diode (D1) lacks protection
  • Open and adjacent pin short-circuit tolerant
  • Short-to-ground tolerant of each pin
  • Externally adjustable compensation
  • Compatible with ceramic output capacitors