| Model |
Manufacturers |
lot number |
encapsulation |
illustrate |
| BQ2011 |
TI |
10+ |
SOP |
NiCd battery fuel gauge >(
|
| BQ2012 |
TI |
10+ |
SOP |
NiCd/NiMH power monitoring with 1-wire (DQ) interface, 5 LED drivers, and slow charge control |
| BQ2013H |
TI |
10+ |
SOP |
NiCd/NiMH/Lead Acid Charge Monitor for high discharge rates (>10A), programmable offset errors, and load compatibility |
| BQ2014 |
TI |
10+ |
SOP |
NiCd/NiMH fuel gauge with 1-wire (DQ) I/F, 5 LED drivers, and control signals for the BQ2004 fast charge IC |
| BQ2014H |
TI |
10+ |
SOP |
NiCd/NiMH fuel gauge with high-speed 1-wire (HDQ) interface and 5 LED drivers |
| BQ2018 |
TI |
10+ |
SOP |
Multi-compound charge/discharge counter with high-speed 1-lead interface (HDQ). |
| BQ2031 |
TI |
10+ |
SOP |
A lead-acid switch-mode charge management IC with a user-selectable charging algorithm |
| BQ2040 |
TI |
10+ |
SOP |
Multi-compound Intelligent Battery System (SBS) 1.0 compliant fuel gauge with 4 LED drivers |
| BQ2050 |
TI |
10+ |
SOP |
Li-ion battery fuel gauge with 1-lead (DQ) interface and 5 LED drivers |
| BQ2050H |
TI |
10+ |
SOP |
Lithium battery fuel gauge with high-speed 1-wire (HDQ) interface and 5 LED drivers |
| BQ2052 |
TI |
10+ |
SOP |
Lithium primary battery fuel gauge with high-speed 1-wire (HDQ) interface, 3 programmable LED modes |
| BQ2054 |
TI |
10+ |
SOP |
Switch-mode charge management ICs for lithium-ion batteries |
| BQ2057 |
TI |
10+ |
SOP |
Lithium-ion low-dropout linear (4.1V) charge management IC for a section application with AutoCompTM |
| BQ2057C |
TI |
10+ |
SOT |
Lithium-ion low-dropout linear (4.2V) charge management IC for 1-section applications with AutoCompTM |
| BQ2057W |
TI |
10+ |
TSSOP |
Lithium-ion low-dropout linear (8.4V) charge management IC for two-section applications with AutoCompTM |
| BQ2083DBT |
TI |
10+ |
TSSOP-38 |
SBS compliant fuel gauge for use with bq29311 |
| BQ2084RTTT-V140 |
TI |
10+ |
TSSOP-38 |
Fuel gauge with LED delay, SBS v1.1 compliant |
| BQ2085DBTR |
TI |
2010+ |
TSSOP-38 |
SBS compliant fuel gauge IC for use with the bq29311 |
| CD74HC257 |
TI |
09+ |
DIP |
High-speed CMOS logic quad 2-input multiplexer with co-directional three-state output |
| CD74HC253 |
TI |
09+ |
DIP |
High-speed CMOS logic dual 4-input multiplexer |