Model |
Manufacturers |
lot number |
encapsulation |
illustrate |
BQ2063DBQ |
TI |
2010+ |
SSOP28 |
Lithium-ion fuel monitor with protected interface compliant with SBS version 1.1 |
BQ24001PWPR |
TI |
10+ |
TSSOP20 |
Lithium-ion linear (4.1V vs 4.2V) charge management IC with integrated FET and 1 LED for single-cell battery applications |
BQ24003RGWRG4 |
TI |
2009 |
TSSOP |
Lithium-ion linear (4.1V 4.2V) charge management IC for 1-cell applications with integrated FETs and bicolor LEDs |
BQ24004PWP |
TI |
10+ |
TSSOP20 |
Lithium-ion linear (8.2V 8.4V) charge management IC for two-cell applications with integrated FETs, one LED |
BQ24006PWP |
TI |
10+ |
TSSOP20 |
Lithium-ion linear (8.2V 8.4V) charge management IC for two-cell applications with integrated FETs, bicolor LEDs |
BQ2016DBQG4 |
TI |
08+ |
SSOP-28 |
NiCm/NiMH fuel gauge for high discharge rate (>5A) with less than (
|
BQ24007RGWR |
TI |
09+ |
QFN20 |
Single-cell Li-Ion charger for PDA/Internet devices with integrated FETs and LEDs |
BQ24008PWP |
TI |
10+ |
TSSOP20 |
Single-cell Li-Ion charger for PDA/Internet equipment with integrated FET and bi-color LEDs |
BQ24002PWPR |
TI |
09+10+ |
HTSSOP20 |
Li-ion linear (4.1V 4.2V) charge management IC with integrated FET and 2 LEDs for 1-cell applications |
BQ24005PWPG4 |
TI |
10+ |
TSSOP-20 |
Lithium-ion linear (8.2V 8.4V) charge management IC for two-cell applications with integrated FETs, two LEDs |
BQ2023PWR |
TI |
2011+ |
TSSOP8 |
Single-wire advanced battery monitoring ICs for mobile phone and PDA applications |
BQ26231PWRG4 |
TI |
10+ |
TSSOP8 |
Cost-effective coulomb counters for battery capacity monitoring in embedded portable applications |
BQ24200DGN |
TI |
2009+ |
MSOP-8 |
Features a temperature sensor in a 500mA 4.2V monolithic Li-Ion charger in an MSOP-8 package for current-limiting applications |
BQ24201DGN |
TI |
2010+ |
MSOP8 |
Features a temperature sensor in an MSOP-8 package with a 500mA 4.1V monolithic Li-Ion charger for current-limiting applications |
BQ24202DGNR |
TI |
10+ |
MSOP-8 |
500mA 4.2V monolithic Li-ion charger for current-limited applications with state of charge in MSOP-8 package |
BQ24203DGN |
TI |
2010+ |
8-MSOP |
500mA 4.1V monolithic Li-Ion charger with state of charge in MSOP-8 package for current-limit applications |
BQ24204DGN |
TI |
10+ |
SSOP-8 |
500mA 4.2V monolithic Li-Ion charger in MSOP-8 package for current limiting applications, |
BQ24205DGNG4 |
TI |
09+ |
MSOP8 |
500mA 4.1V monolithic Li-Ion charger in MSOP-8 package for current-limiting applications, |
BQ29311PWRG4 |
TI |
10+ |
TSSOP-24 |
3- or 4-cell Li-ion battery protection IC for use with the BQ2083/5 |
BQ26200PWR |
TI |
08+ |
TSSOP-8 |
Precision flash-based multi-compound charge/discharge counter with 1-wire interface (HDQ). |