Model |
Manufacturers |
lot number |
encapsulation |
illustrate |
BQ24721CRHBTG4 |
TI |
10+ |
QFN 32 |
Smart Battery Charger with SMBus and System Power Selector, Softer Turn-On |
BQ29414PWRG4 |
TI |
09+ |
TSSOP-8 |
Voltage protection for Level 2 protection of 2, 3 or 4 lithium batteries |
BQ29415PWR |
TI |
10+ |
TSSOP-8 |
Voltage protection for Level 2 protection of 2, 3 or 4 lithium batteries |
BQ25015RHLRG4 |
TI |
2010+ |
QFN-20 |
Single-Chip Charger and DC/DC Converter IC For Bluetooth Headsets |
BQ25017RHLRG4 |
TI |
2009 |
QFN-20 |
Dual input charger with integrated synchronous buck converter, fixed output 1.8V |
bq2024DBZRG4 |
TI |
1018+ |
SOT23-3 |
1.5K bit serial EPROM with SDQ interface |
bq2024DBZRG4 |
TI |
09+ |
SOT23-3 |
1.5K bit serial EPROM with SDQ interface |
BQ24113ARHLRG4 |
TI |
10+ |
QFN-20 |
Host-controlled synchronous switch-mode lithium-ion charger with 2A FET, 1 or 2 batteries |
BQ24018DRCRG4 |
TI |
10+ |
QFN-14 |
Single-chip Li-Ion Charge Management IC (bqTINY) for Portable Applications |
BQ20Z90DBTR-V150 |
TI |
09+10 |
TSSOP-30 |
A fuel gauge compliant with SBS v1.1 for use with the bq29330 |
BQ20Z951DBTR-R150 |
TI |
2011+ |
TSSOP-44 |
Impedance Track's SBS 1.1 compliant fuel monitor |
BQ24316DSGRG4 |
TI |
10+ |
QFN12 |
Charger front-end protection IC with 30V (max) Vin and 6.8V OVP |
BQ24103ARHLRG4 |
TI |
10+ |
QFN-20 |
Independent synchronous switch-mode Li-ion charger with 2A FET |
BQ24300DSGRG4 |
TI |
10+ |
SON-8 |
Charger front-end protection IC with 30V (max) Vin and 5.5V LDO output |
SN74LS590 |
TI |
06+ |
DIP |
An 8-bit binary counter with output registers and a three-state output |
SN74LS393 |
TI |
09+ |
SOP |
Dual 4-bit binary counter |
SN74LS293 |
TI |
09+ |
DIP |
4-bit binary counter |
SN74LS193 |
TI |
09+ |
DIP |
Synchronous 4-bit plus/minus binary counter with dual clock and zeroing |
SN74LS191 |
TI |
10+09+ |
SMD DIP |
Synchronous 4-digit plus/minus counter with plus/minus mode control |
SN74LS169B |
TI |
10+ |
DIP |
Synchronous 4-bit plus/minus binary counter |