| Model |
Manufacturers |
lot number |
encapsulation |
illustrate |
| BQ24002PWPR |
TI |
09+10+ |
HTSSOP20 |
Lithium-ion linear (4.1V 4.2V) charge management IC with integrated FET and 2 LEDs for 1-section application areas |
| BQ24005PWPG4 |
TI |
10+ |
TSSOP-20 |
Lithium-ion linear (8.2V 8.4V) charge management IC for two-section application areas with integrated FETs, two LEDs |
| BQ2023PWR |
TI |
2011+ |
TSSOP8 |
Single-wire advanced battery monitoring ICs for mobile phone and PDA applications |
| BQ26231PWRG4 |
TI |
10+ |
TSSOP8 |
Cost-advantageous coulomb counters for battery capacity monitoring in embedded portable applications |
| BQ24200DGN |
TI |
2009+ |
MSOP-8 |
Features a temperature sensor in an MSOP-8 package for a 500mA 4.2V monolithic lithium-ion charger for current-limiting applications |
| BQ24201DGN |
TI |
2010+ |
MSOP8 |
500mA 4.1V monolithic lithium-ion charger with temperature sensor in MSOP-8 package for current-limiting applications |
| BQ24202DGNR |
TI |
10+ |
MSOP-8 |
500mA 4.2V monolithic lithium-ion charger for current-limiting applications, with state of charge, available in an MSOP-8 package |
| BQ24203DGN |
TI |
2010+ |
8-MSOP |
500mA 4.1V monolithic lithium-ion charger with state of charge in MSOP-8 package for current-limiting applications |
| BQ24204DGN |
TI |
10+ |
SSOP-8 |
500mA 4.2V monolithic lithium-ion charger in MSOP-8 package for current-limiting applications, |
| BQ24205DGNG4 |
TI |
09+ |
MSOP8 |
500mA 4.1V monolithic lithium-ion charger in MSOP-8 package for current-limiting applications, |
| BQ29311PWRG4 |
TI |
10+ |
TSSOP-24 |
3 or 4 Li-ion battery protection ICs for use with the BQ2083/5 |
| BQ26200PWR |
TI |
08+ |
TSSOP-8 |
Flash-based precision multi-compound charge/discharge counter with 1-wire interface (HDQ). |
| BQ24401DRG4 |
TI |
10+ |
SOP-8 |
Programmable NiCd/NiMH battery fast charge management device |
| BQ2060A-E619DBQRG4 |
TI |
2010 |
SSOP-28 |
Multi-compound SBS version 1.1 compliant fuel gauge with 5 LED driver and additional battery management controls |
| BQ24010DRCRG4 |
TI |
10+ |
QFN-10 |
bqTINY(TM) Linear 1-cell (4.2V) Li-ion charger with 1A FET, AC presence, and temperature sensor in a QFN/MLP-10 package |
| BQ24020DRCRG4 |
TI |
2010+ |
QFN-10 |
The bqTINY-II monolithic 1-cell lithium-ion charger features USB/AC power management, is housed in a 3x3mm2 QFN package, and features an enable terminal and temperature sensor |
| BQ24022DRCR |
TI |
09+ |
QFN10 |
bqTINY-II 1-cell lithium-ion charger with USB/AC power management in a 3x3mm2 QFN-10 package with enable and power good indication |
| BQ24703RHDRG4 |
TI |
09+ |
TSSOP-24 |
Multi-compound battery charge controller and system power selector |
| BQ24025DRCRG4 |
TI |
10+ |
SON-10 |
bqTINY-II 1-cell lithium-ion charger (2Ah) in a 3x3 QFN-10 package with USB/AC power management, 7h timer, enable terminal, and temperature sensor |
| BQ26500PWR |
TI |
10+ |
TSSOP-8 |
Whole battery fuel gauge for one and two lithium-ion battery applications |