| Model |
Manufacturers |
lot number |
encapsulation |
illustrate |
| BQ24205DGNG4 |
TI |
09+ |
MSOP8 |
500mA 4.1V monolithic Li-Ion charger in MSOP-8 package for current-limiting applications, |
| BQ29311PWRG4 |
TI |
10+ |
TSSOP-24 |
3- or 4-cell Li-ion battery protection IC for use with the BQ2083/5 |
| BQ26200PWR |
TI |
08+ |
TSSOP-8 |
Precision flash-based multi-compound charge/discharge counter with 1-wire interface (HDQ). |
| BQ24401DRG4 |
TI |
10+ |
SOP-8 |
Programmable NiCd/NiMH fast charge management device |
| BQ2060A-E619DBQRG4 |
TI |
2010 |
SSOP-28 |
Multi-compound SBS version 1.1 compliant fuel gauge with 5 LED drivers and additional battery management control |
| BQ24010DRCRG4 |
TI |
10+ |
QFN-10 |
bqTINY(TM) linear 1-cell (4.2V) Li-Ion charger with 1A FET, AC PRESENCE, AND TEMPERATURE SENSOR IN A QFN/MLP-10 PACKAGE |
| BQ24020DRCRG4 |
TI |
2010+ |
QFN-10 |
bqTINY-II monolithic 1-cell Li-Ion charger with USB/AC power management, in a 3x3mm2 QFN package with enable terminal and temperature sensor |
| BQ24022DRCR |
TI |
09+ |
QFN10 |
bqTINY-II 1-Section Li-Ion Charger with USB/AC Power Management in a 3x3mm2 QFN-10 package with enable terminal and power good indication |
| BQ24703RHDRG4 |
TI |
09+ |
TSSOP-24 |
Multi-compound battery charge controller and system power selector |
| BQ24025DRCRG4 |
TI |
10+ |
SON-10 |
bqTINY-II 1-Cell Li-Ion Charger (2Ah) in a 3x3 QFN-10 package with USB/AC power management, 7h timer, enable terminal, and temperature sensor |
| BQ26500PWR |
TI |
10+ |
TSSOP-8 |
Complete battery level monitor for one- and two-cell Li-Ion applications |
| BQ26501PWR |
TI |
2010+ |
TSSOP-8 |
OMAP compatible fuel gauge for 1- and 2-cell Li-Ion batteries |
| BQ24024DRCRG4 |
TI |
09+ |
SON-10 |
1-cell Li-Ion charging IC with USB/AC power management, in a 3x3 QFN-10 package, timer/stop enable and temperature sensor |
| BQ24100RHLR |
TI |
10+ |
QFN-20 |
The bqSWITCHER(TM) synchronous switch-mode Li-Ion charger with 2A FET in a QFN package is a 1-cell standalone version |
| BQ24103ARHLRG4 |
TI |
10+PB |
QFN20 |
bqSWITCHER(TM) synchronous switch-mode Li-ion charger with 2A FET in QFN package, 1-cell or 2-cell standalone version |
| BQ24113ARHLRG4 |
TI |
2010+ |
QFN-20 |
The bqSWITCHER(TM) synchronous switch-mode Li-Ion charger with 2A FET in a QFN package is available in 1- or 2-cell system control versions |
| BQ24115RHLR |
TI |
09+ |
QFN-20 |
bqSWITCHER(TM) synchronous switch-mode Li-Ion charger with 2A FET in QFN package, 1-cell to 3-cell system control version |
| BQ26221PWR |
TI |
10+ |
TSSOP |
Flash-based precision multi-compound charge/discharge counter with voltage measurement and HDQ/OMAP communication |
| BQ24026DRCRG4 |
TI |
09+ |
SON-10 |
1-cell Li-Ion charging IC with USB/AC power management, available in a 3x3 QFN-10 package, with timer enable and temperature sensor |
| BQ24108RHLRG4 |
TI |
10+ |
QFN-20 |
Stand-alone bqSWITCHER(TM) asynchronous switch-mode lithium-ion charger in a QFN package with 2A FET |