The BUF01900 and BUF01901 provide a programmable output voltage with digital resolution.The output of the program is via a standardized, two-wire serial interface.Once the correct Wycombe is establishing voltage, it can be easily stored into synthetic non-volatile memory.
An initial output voltage and regulation range can be externally resistor-divider.With an ultra-high output current capability (100mA), the BUF01900 and BUF01901 Wycombe Performance has the calibrators suitable as programmable in LCD panels.
The digital-to-analog converter has a BUF01901 (DAC) output that comes out directly.It has a slightly lower cost and works well with the BUF01900 Wycombe in conventional integrated BUFxx702 gamma buffers, BUFxx703, BUFxx704 and BUF11705.
characteristic
- Digital resolution
- Rail-to-rail output
- Non-volatile memory storage on the spaceship
- 100mA IOUT:
- Low 900μA Supply Current:
- 7V 18V voltage: Yes supply
- To 5.5V digital supply: 2.0V
- Standardization of the interface, second line
- 2kV high anti-static level: constant, 500V CDM
-
apply
- LCD panel Wycombe calibrated
- LCD display brightness and contrast control
- Potentiometer replacement
- Motor driven
- Programmable power supply
- Adjust the programmable offset
- Control of actuators
parameter
| |
BUF01900 |
| # Wycombe Channel |
1 |
| Pair (Min)(V) |
7 |
| Pair (Max) (V) |
18 |
| Intelligence quotient (mA) per channel (stream) |
1 |
| Vcom-Output Current (Current) (mA) |
100 |
| Pin/Pack |
10SON 8TSSOP, |
| Count it |
1 |