CD4051BM96

illustrate

The CD4051B, CD4052B, CD4053B analog multiplexer and digitally controlled analog switches have low and very low impedance shut-off leakage currents. Polypropylene controls analog signals up to 20V (digital signal amplitude is 4.5V, if V DD-V ẞ = 3V, A V DD-V EE up to 13V can be controlled; For the difference in the level of the V DD-V electronic engineering album above 13V, a V DD-V S-S (requires at least 4.5V). For example, if V DD = +4.5 V, five ß = 0V, and V EE = -13.5V, the analog signal from -13.5V to +4.5 V can be controlled from 0V to 5V via digital input. These multiplexer circuits dissipate extremely low static power control signals throughout the supply voltage range of the V DD-V and VDD-V EE, with state-independent logic.

characteristic

• Wide range of digital and analog signal levels
  • 3V to 20V digital...
  • Mock... 20V polypropylene
• Low on-resistance, 125 (Typical) Signal input range over 15V is polypropylene V DD - V Electronic Engineering Album = 18V
• High shutdown resistance, channel leakage ± of 100Pa (typical) in V DD - V = 18V
• Logic Level) Converts to Digital Signal Processing 20V for 3V to 20V (VD-V ß = 3V to Analog Signal Switching to 20V Polypropylene (VDD-V Electronics Album = 20V)
• Matching switch characteristics, study pair = 5 (Typical value) of V DD - V = 15V when
• Very low (typical) static power consumption in full digital control input and supply conditions, 0.2μW at VD-V ß = VD-V Electronics Album = 10V
• Binary address decoding chip
• Rated parameters of 5V and 10V and 15V
• 10% of the test time is at 20V quiescent current
• The maximum input current of 1μA is over the 18V range for all package temperatures, and 100nA at 18V and 25°C
• Switch before eliminating overlapping channels
• apply
  • Analog and digital multiplexing and multiplexing
  • A/D and D/A conversion
  • Signal gating