DAC102S085CIMMX

• Product Introduction

 peculiarity   Guaranteed monotony Low-power operation Rail-to-rail voltage output Power-on reset to 0V Output updates at the same time Wide Supply Voltage Range (+2.7 V to +5.5 V) The smallest package in the industry Power-down mode   illustrate DAC102S085 is a full-featured, general-purpose dual-channel 10-bit voltage output digital-to-analog converter (DAC) that can operate from a single +2.7 V to 5.5V supply with a consumption of 3V 0.6 megawatts, at 5V and 1.6 megawatts. DAC102S085 are packages, 10-pin LLP and MSOP packages. The 10-pin LLP package makes it DAC102S085 the smallest dual-channel DAC in its class. The on-chip output amplifier allows for rail-to-rail output swing and three-wire serial interface clock rates up to 40 MHz over the entire supply voltage range. Competitive devices are limited supply voltages with a clock rate of 25 MHz in the range of 2.7V to 3.6V. Serial interface compatible with standard SPI, QSPI, MICROWIRE and DSP interfaces. DAC102S085 is referenced to two channels and can provide as much output dynamic range as possible with one variation between voltage 1V and V. DAC102S085 has a 16-bit input shift register that controls the output, operating mode, power-off conditions, and binary input data to be updated. The two outputs can be updated simultaneously or separately depending on the settings of the operating bits of both modes. Power-on reset circuit to ensure that the output power of the DAC up to zero volts remains until there is a valid write device. Power-down function, reduce power consumption Less than microwatts There are three different terminal options. The low power consumption and small package DAC102S085 make it a great choice for using battery-powered devices. DAC102S085 is a pin-compatible DAC series that includes 8-bit DAC084S085 and 12-bit DAC122S085. DAC102S085 operates over an extended industrial temperature range of -40°C to +105°C. Key specifications: resolution 10th place Integral nonlinearity (INL) ± 2 LSB (max) DNL 0.35 / -0.25 LSB (max) Establishment time 6 microseconds (max) Zero code errors 15 mV (max) Full scale error -0.75% FS (max) Power supply

apply

• 电池供电仪表
• 数字增益和失调调整
• 可编程的电压和电流源
• 可编程衰减器