DAC8562是一款完整的并行输入、12位电压输出
Digital-to-analog converters，采用+5 V单电源供电。这些单芯片DAC采用CBCMOS工艺制造，适合仅有+5 V电源的系统，具有成本低、易于使用的特点。
In addition to the DAC, an on-chip rail-to-rail amplifier, latch, and reference are integrated. The REFOUT reference is adjusted to 2.5 V, and the on-chip amplifier boosts the DAC output to 4.095 V full-scale. Users only need to provide a +5 V supply.
DAC8562 uses standard binary coding method. The op-amp outputs from 0 V to +4.095 V with a resolution of 1 mV per person and are capable of driving ± 5 mA current. Due to the use of low-temperature coefficient silicon-chromium thin film resistors, the linearity error performance relative to the digital input code is excellent.
High-speed parallel digital interfaces can connect with the fastest processors and processors do not have to wait. The interface is very simple and requires only one CE signal. The asynchronous CLR input sets the output to zero.
DAC8562 is available in two different 20-pin packages: molded DIP and SOL-20 packages, each rated for a temperature range of -40°C to +85°C and a supply voltage range of +5 V ± 5%.
For MIL-STD-883 applications, contact your local Analog Devices distributor for the DAC8562/883 data sheet, which is rated for an operating temperature range of -55°C to +125°C.