- 8. 3 pins on the equalization level or settable via SMBus interface
- DC-coupled inputs and outputs
- UXGA support from 250 Mbps to optimized 2.25 Gbps, 480 I/P, 720 operating I/P, 1080 Remainder, and 1080 P resolution with 8, 10, and 12-bit color depths
- Both DS16EV5110A devices support DVI/HDMI interface dual link
- 1.0 DVI and HDMI 1.3a standard interface compatible TMDS
- Clock Channel Signal Detection (Los Angeles)
- Power saving Standby mode enabled
- The System Management Bus (SMBus) provides boost, output amplitude, enable control, and clock channel signal detection thresholds
- Low Power Consumption: 475mW (typical)
- 0.13 user interface 1.65 Gbps total jitter, including cables
- 3.3V single power supply
- Small 7mm x 7mm in a 48-pin leadless LLP package
- Operating temperature range of -40°C to +85°C
- Extended TMDS cables reach:
- > 40m 24 AWG DVI cable (1.65Gbps)
- > 20 m 28 AWG DVI cable (1.65Gbps)
- > 20 Meters Cat5/Cat5e/Cat6 Cable (1.65Gbps)
- > 20 meters of 28 gauge AWG HDMI cable (2.25Gbps)
illustrate
The DS16EV5110A is a multi-channel video cable equalizer optimized for extended source/repeater/receiver applications. It works between 250Mbps and 2.25Gbps (per data channel) for common applications between 2.25Gbps and 2.25Gbps. It contains three data channels for transition minimized differential signaling (TMDS) and a clock channel for DVI and HDMI interfaces designation. It provides skin collection and dielectric loss, a common phenomenon when compensating, and relaying commercially available high-definition video cable video.
Input meets the required DVI and HDMI input equalization and programmable levels of functionality. The programmable equalization level is increased to provide the best signal and reduce inter-symbol interference. Eighth, strengthen the interface or optional system management bus through pin selection at all levels.
The clock channel optimizes clock rates up to 225 MHz and the functionality of signal detection circuitry. To maximize noise immunity, DS16EV5110A features a signal detector with programmable thresholds. The threshold is adjustable via the System Management Bus (SMBus) interface.
The DS16EV5110A can be used for source apps, library applications, or as a repeater.
The DS16EV5110A also provides system power management support for enabling control via outputs. By providing additional control is advantageous for customizing and optimizing SMBus requirements for specific applications. These controls include functions such as output amplitude, boost control, and programmable system-level diagnostics.
The DS16EV5110A is a DS16EV5110 of pin-to-pin substitution. It has an enhanced CML output that presents high impedance when power-off.
apply
- HDMI/DVI cable extender
- HDMI/DVI switch
- Projector
- High-definition displays
|