DS22EV5110SQE

• Product introduction

 peculiarity

• Optimized for HDMI/DVI source and repeater applications
• The TMDS-compatible input receive equalization feature supported data rates up to 2.25 Gbps
• TMDS emission de-emphasis in compatible output configurations
• Reduced jitter delivery for dedicated CDRs on each data channel
• The resistor-adjustable differential output voltage is extended for AC-coupled Category 5 and Category 6
• Wide range of cable equalizer settings up to 2.25 Gbps
• The total output power of 2.25 Gbps is 0.09 UI jitter
• DVI 1.0 and HDMI v1.3a are compatible with TMDS source and receiver interfaces
• 7mm x 7mm 48-pin LLP package
• > 8 kV HBM ESD protected
• 0 °C to +70 °C operating temperature

illustrate

The DS22EV5110 is a 6.75 Gbps (3 × 2.25 Gbps) optimized and high-performance clock recovery function extension to equalizer for DVI™ and HDMI™ cable extension applications. It supports 3 data lanes with minimal transmission differential signaling (TMDS ®) and a single clock channel with data transfer rates up to 2.25 Gbps per data channel via DVI™v1.0, HDMI™v1.3a. The device integrates a configurable receive equalizer, clock and data recovery (CDR) circuitry and de-emphasis drivers for each data channel via DVI v1.0, and HDMI v1.3a data transfer rates up to 2.25 Gbps per data channel. The device integrates a configurable receive equalizer with clock and data recovery (CDR) circuitry on each data channel. This clock channel feeds into a high perfromance phase-locked loop (PLL) to regenerate a low jitter output clock data recovery, enabling the expansion of the capabilities of the driving repeater application.

The DS22EV5110 equalizes a version of the 28-gauge AWG HDMI cable larger than 25 meters, enabling 1080p resolution, 12-bit color depth depth (2.25 Gbps) for low-jitter clock and data signal output, reducing deterministic jitter and random jitter. The total jitter obtained is 0.09 UI or more supported data transfer rate. This output jitter is extremely low during tight timing budgets, providing additional margin and flexibility for system designers. This is ideal for DVI and HDMI source and repeater applications.

The transmitter supports emission de-emphasis, so the output can be used to drive additional cable lengths or trace optimized configurations for FR4.

apply

• Repeater app

• HDMI/DVI extension
• Source application

• Video card
• Blu-ray DVD player
• Game
• Application of sinks

• High-definition display
• Projector