Product images are for illustrative purposes only
Product details are welcome upon request

DS2482-800

Category:sensor
Product Name:The I²C-to-1-Wire bridging device performs bidirectional protocol translation between the I²C master and the 1-Wire slave
Manufacturers:DALLAS
Production Batch Number:12+
Encapsulation:SOP8
Stock Status:There is stock
Stock Quantity:80000
Minimum order quantity: 1
Details:

Product introduction

DS2482-800 The I²C-to-1-Wire bridging device performs bidirectional protocol translation between the I²C master and the 1-Wire slave

Key features

My I2C host interface supports I²C communication rates of 100kHz and 400kHz
1-Wire host with a choice of active or passive 1-Wire pull-up IOs
Provides 1-Wire reset/acknowledge, 8-bit, unit, and 3-bit IO sequences
Standard and high-speed 1-Wire communication speeds
Pendulum-controlled 1-Wire edges
Provides a robust 1-Wire pullup through an internal low-impedance signal path
The PCTLZ output optionally controls the external MOSFETs for a more robust pull-up requirement
Supports power-saving sleep mode
First, the I²C address assignment address is entered
Business range: 2.9V to 5.5V, -40°C to +85°C
9. Solder ball WLP package

Application/Purpose

Mobile phone/PDA
Industrial sensors
Medical devices
printer

description

The DS2482's -101-i-c-to-1 line bridge device's interface is either direct standard (100kHz max) or fast (400kHz max) and c-master to perform bidirectional protocol conversion between I'c Master and any downstream 1-Wire slave devices. In contrast to any additional 1-Wire slaves, the DS2482-101 is a 1-Wire master. An internal factory-calibrated timer relieves the system host processor from generating time-critical 1-Wire waveforms, supporting standard and high-speed 1-Wire communication speeds. To optimize 1-Wire waveform generation, the DS2482-101 performs rising and falling 1-Wire edge slew rate control and provides additional programmable features to match the drive characteristics of the 1-Wire slave environment. Programmable, power from 1-Wire that supports strong pull-up capabilities is delivered to 1-Wire devices such as EEPROMs and sensors. These features in the DS2482-101 are combined with outputs to enhance strong-pull application control of external MOSFETs. In I²C slave address assignment one binary address input control, other slave devices in the I²C system resolve potential conflicts. When not in use, the device can consume minimal power in sleep mode.

andDS2482-800Related ICs are:

Model	Manufacturers	lot number	encapsulation	illustrate
DS2482-800	DALLAS	12+	SOP8	The I²C-to-1-Wire bridging device performs bidirectional protocol translation between the I²C master and the 1-Wire slave
DS2482-100	DALLAS	12+	SOP8	The I²C-to-1-Wire bridging device performs bidirectional protocol translation between the I²C master and the 1-Wire slave
DS2482-101	DALLAS	12+	SOP8	The I²C-to-1-Wire bridging device performs bidirectional protocol translation between the I²C master and the 1-Wire slave
LTC2482	LT	10+	QFN	Easy-to-Use, Ultra-Tiny 16-Bit ADC
2SK2482	NEC	N／A	TO-3P	N／A
2SC2482	Toshiba	06+	TO-92	Brand new original
C2482	Toshiba	04+	TO-92	Brand new original
2SC2482TA	Toshiba	06+	TO-92L	Transistor
ISL24822	INTERSIL	10+	SOP	ISL24822, 14-channel programmable 1-V channel COM and I2 CTFT - LCD reference voltage generator with integrated programmable VCOM calibrator, 14-Channel Programmable I 2 C TFT-LCD Reference Voltage Generator with 1-Channel V COMA
ISL24821	INTERSIL	09+	QFN	ISL24821, 12-Channel Programmable Switching I 2 CTFT-LCD Reference Voltage Generator with Integrated Single Op Amp and V COM Calibration, 12-Channel Programmable Switchable I 2 C TFT-LCD Reference Voltage Generator with Integra

Popular searches

Model	Manufacturers	lot number	encapsulation	illustrate
CL1215-02P72ET-U2	Schaltbau	2023+	Contactors	CL1215/02 P 72ET-U2 1, 2 and 3 pole AC and DC NO contactors for voltages up to 1,500 V
CL1115-02P72ET-U2	Schaltbau	2023+	Contactors	1, 2 and 3 pole AC and DC NO contactors for voltages up to 1,500 V
D-U204N-KLGQ	Mors Smitt	2023+	Relays	No magnetic arc blow-out
D-U204N-KLCQ	Mors Smitt	2023+	Relays	No magnetic arc blow-out
MIP30F00830-S1048	Amphenol Positronic	2023+	connector	MIP series connectors
C163C/110EV-R1	Schaltebao	2023+	Contactors	Contactors
F670-H4V-XUU	LEACH	2023+	Relays	F670-H4V-XUU+SHKE470-110-AD
F670-H4VP-XUXU	LEACH	2023+	Relays	F670-H4VP-XUXU+SFE670-1-1
AZ16-12ZI-B1-1747-M20	SCHMERSAL	2023+	switch	Safety switches
RX2025GE1	Surio	2023+	connector	Extract, Remove, and Insert Tools Contact extraction tool #16
5106.021.09.24	Surio	2023+	connector	Extract, remove, and insert tools Extract tool with pop-up
ABMPSE06T28M4SV0N	AB Connectors	2023+	connector	Plug with RFI Ground
ABMPSE06T36M2SV0N	AB Connectors	2023+	connector	Plug with RFI Ground
ABMP18T28M13SV0N	AB Connectors	2023+	connector	RAIL AND MILITARY LAND SYSTEMS
ABCIRHSE06JE1812SCNF80M32V0	AB Connectors	2023+	connector	Halogen Free Bayonet Lock Connector Series
TSW-101-06-LM-D	samtec	2023+	connector	Classic PCB Header Strips, 0.100" pitch
TNL22ERT-62	ABB	2016+	Contactors	4P St Contactor Relay 77-143Vdc \|Abb TNL22ERT-62
62EM1-00001	Microchip	2023+	Development board	AgileSwitch® 62mm Electrical Master SiC Gate Driver Board
E2E-X7D212-R2M	Omron	2023+	sensor	Standard Proximity Sensor
E2E-X7D212-R5M	Omron	2023+	sensor	Standard Proximity Sensor

DALLAS brand product recommendation

Model	Manufacturers	lot number	encapsulation	illustrate
DS2482-100	DALLAS	12+	SOP8	The I²C-to-1-Wire bridging device performs bidirectional protocol translation between the I²C master and the 1-Wire slave
DS2482-101	DALLAS	12+	SOP8	The I²C-to-1-Wire bridging device performs bidirectional protocol translation between the I²C master and the 1-Wire slave
DS2483	DALLAS	12+	SOP8	Single-channel 1-Wire host adjustable timing and sleep modes
DS3231SN	DALLAS	10+11+	SOP16	Hong Kong spot, imported original
DS9092T	DALLAS	10+11+	IBACC	Hong Kong spot, imported original
DS1233M-5	DALLAS	10+11+	TO-92	Hong Kong spot, imported original
DS2786G	DALLAS	10+11+	TDFN	Hong Kong spot, imported original
DS28E01P	DALLAS	10+11+	TSOC6	Hong Kong spot, imported original
DS2781E	DALLAS	10+11+	SMD	Hong Kong spot, imported original
DS2431P	DALLAS	10+11+	SMD	Hong Kong spot, imported original
DS9503P	DALLAS	10+11+	TSOC6	Hong Kong spot, imported original
DS2480E	DALLAS	10+11+	SOP8	Hong Kong spot, imported original
DS1232CP	DALLAS	10+11+	DIP	Hong Kong spot, imported original
DS1232LPS-2	DALLAS	10+11+	SOP8	Hong Kong spot, imported original
DS18B20U+	DALLAS	10+11+	MSOP8	Hong Kong spot, imported original
DS2760BE	DALLAS	10+11+	SMD	Hong Kong spot, imported original
DS1337U	DALLAS	10+11+	MSOP8	Hong Kong spot, imported original
DS1673E-3	DALLAS	10+11+	TSSOP20	Hong Kong spot, imported original
DS21458+	DALLAS	10+11+	BGA256	Hong Kong spot, imported original
DS1225AB-200	DALLAS	09+	DIP	64K non-volatile SRAM