DS25BR204TSQ

• DC - 3.125 Gbps low jitter, low offset, low power operation
• Pin-selectable send pre-emphasis and receive equalization eliminate data-related jitter
• Wide input common-mode range allows for DC-coupled interfaces of LVDS, CML, and LVPECL drivers
• Redundant inputs
• Integrated 100Ω input and output terminations
• Adjacent assembly on 8 kV ESD-protected LVDS I/O pins
• Small 6mm × 6mm LLP-40 space-saving bag

illustrate

DS25BR204 is a 3.125 Gbps high-speed signal routing and switching-optimized 1:4 LVDS repeater lossy FR-4 printed circuit board backplane and balanced cable. Fully differential signal paths ensure excellent signal integrity and noise immunity.

The device has two different LVDS input channels and a selection line to determine which input is active. The two inputs provide programmable equalization for maximum signal strength. The signal loss (^LOS) circuit monitors two input channels and a unique ^LOS pin when no signal is reported for input detection.

The wide input common-mode range allows the switch to accept LVDS, CML, and LVPECL level signals at the output level of LVDS. A very small package size requires minimal space in the board, and flow-through pins allow board design work to be easier. Each differential input and output is terminated with a 100Ω resistor to reduce the device's return loss, reduce the number of components, and further reduce board space.

apply

• Clock and data distribution
• Clock and data buffer and Jupiter
• OC -​​ 48 / STM - 16
• SD/HD/3GHD SDI router