DS26LV32ATMX

• Low-power CMOS design (30 mW typical)
• 5V interoperability with existing RS-422 networks
• Industrial and military temperature ranges
• Compliant with TIA/EIA-422-B (RS-422) and ITU-T Recommendation.11
• 3.3V operation
• ± the ID of the common mode range of 7V = V for 3V
• ± ID of the common mode range of 10V = 0.2V for V
• The receiver turns on input fault protection
• Guaranteed AC parameters: Maximum receive slash: 4 ns Maximum transition time: 10 nanoseconds
• Pin compatible DS26C32AT
• 32 MHz switching frequency
• > 6.5k ESD Protected (HBM).
• Can be used to package SOIC and Cerpack
• Standard Microcircuit Drawing System (SMD) 5962-98585

illustrate

The DS26LV32A is a high-speed quad-differential CMOS receiver that meets both TIA/EIA-422-B and ITU-T.11 requirements. The CMOS features a typical low static of 9 mA of the CC DS26LV32AT, which makes it ideal and power-aware for battery-powered applications. Tri-state ® can, EN and EN*, allowing equipment to be high or low effective. This concession applies to all four receivers.

The receiver output (RO) is an open input that guarantees a high time. The signal receiver can detect a common mode range of ± 10V as low as ± 200 mV and above. The level of receiver output (RO) is compatible with TTL and LVCMOS.