DS90LV032ATMTC

• "400 Mbps (200 MHz) switching rate
• 0.1 nanosecond channel-to-channel skew (typical)
• 0.1 nanosecond differential offset (typical)
• 3.3 ns maximum transmission latency
• 3.3V power supply design
• The power-down LVDS input impedance is high
• Low-power design (40mW@3.3V static)
• Interoperable network with existing LVDS 5V
• Accept the VID of small swings (typical 350 mV).
• Supports open-circuit, short-circuit, and termination input fail-safe
• Compatible with ANSI/TIA/EIA-644
• Industrial grade temperature. Operating range (-40°C to +85°C)
• Offers SOIC and TSSOP packages

illustrate

This DS90LV032A is a quad-CMOS differential line receiver designed for applications requiring ultra-low power consumption and high data rates. The device is designed to support redundant data rates at 400 Mbps (200 MHz) utilizing Low Voltage Differential Signal (LVDS) technology.

This DS90LV032A accepts low-voltage (typical 350 mV) differential input signals and converts them to the 3V CMOS output level. The receiver supports a three-state function and can be used for multiple outputs. The receiver also supports open-circuit, short-circuit, and termination (100Ω) input fault safety. The output of the receiver will be high in all fail-safe conditions.

This DS90LV032A and its companion LVDS line drivers (such as DS90LV031A) offer a new alternative to high-power PECL electroluminescence, high-speed point-to-point interface applications