DS90LV048ATMX

• > switching frequency of 400 Mbps (200 MHz).
• Lead out lines to simplify PCB layout through the process
• 150 ps channel-to-channel skew (typical)
• 100 ps differential offset (typical)
• 2.7 ns maximum propagation delay
• 3.3V power supply design
• High impedance LVDS input power drops
• Low-power design (40mW@3.3V static)
• Works with existing 5V LVDS drivers
• Accepts small swing (typical of 350 mV) differential signal levels
• Open, short, and termination inputs support fail-safe
• Threshold area from 0V to -100mV
• Compliant with ANSI/TIA/EIA-644 standards
• Industrial operating temperature range (-40°C to +85°C)
• Available in SOIC and TSSOP packages

illustrate

DS90LV048A is a quad-flow CMOS differential line receiver designed for applications requiring ultra-low power consumption and high data rates. The device is designed to support data transfer rates in excess of 400 Mbps utilizing low-voltage differential signaling (LVDS) technology (200 MHz).

DS90LV048A accepts low-voltage (350 mV typical) differential input signals and converts them to the 3V CMOS output level. Receiver, supports three-state ® function, can be used for multiple outputs. The receiver also supports open-circuit, short-circuit, and termination (100 fail-safe). The output of the receiver will be all fail-safe conditions. DS90LV048A has a simple PCB layout with flowing pins.

The EN and EN inputs are combined to control the three-state output. Able to achieve common all four receptions. DS90LV048A and companion LVDS line drivers (such as DS90LV047A) provide a new alternative to point-to-point high-speed interface applications.