Product images are for illustrative purposes only
Product details are welcome upon request
DS9100B
-
Category:switch
-
Product Name:Touch and hold the probe stamping
-
Manufacturers:MAXIM
-
Production Batch Number:12+
-
Encapsulation:usd
-
Stock Status:There is stock
-
Stock Quantity:3000
- Minimum order quantity: 1
- Details:
-
DS9100B Touch and hold the probe stamping
description
The DS9100 touch-holding probe stamping features similar to the DS9098Ibutton ® hold. The full F5 MicroCan™ will fit the DS9098, but the flange and about one-third can be extended if pressed to the DS9100. The DS9100A is used as a probe with the coil spring DS9100C and can be readIContact button. The DS9100A's outer ring stiff spring will provide a continuous contact with additional pressure, transfer and grip MicroCan fully provide a continuous contact, either on the edge (ground) or cover (data). If contact reading is not required, the cantilever center can be used to contact the DS9100B instead of the DS9100C.
Key features
- Compact two-piece, all-metal socket for F5 MicroCan
- Accept two-thirds of MicroCans (one-third of MicroCans will be extended)
- Allow readsIbutton for instant or Yuan Guoyou contact
- The outer circle holds Yuan Guoyou contact MicroCan
- Data Contact Two Options: Cantilever (DS9100B) or Coil Spring (DS9100C)
- > 10000 insert/exit loops without degrading performance
- Contact redundancy and high contact forces guarantee system reliability
- The probe can withstand the high temperatures required to operate printed circuit boards (PCBs) in reflow
- Optimal solder-to-PCB selective tin-lead plating in stainless steel
- The cleaning solution is discharged freely for quick cleaning
andDS9100BRelated ICs are:
| Model |
Manufacturers |
lot number |
encapsulation |
illustrate |
| DS9100B |
MAXIM |
12+ |
usd |
Touch and hold the probe stamping |
Popular searches
| Model |
Manufacturers |
lot number |
encapsulation |
illustrate |
| MIP30F00830-S1048 |
Amphenol Positronic |
2023+ |
connector |
MIP series connectors |
| C163C/110EV-R1 |
Schaltebao |
2023+ |
Contactors |
Contactors |
| F670-H4V-XUU |
LEACH |
2023+ |
Relays |
F670-H4V-XUU+SHKE470-110-AD |
| F670-H4VP-XUXU |
LEACH |
2023+ |
Relays |
F670-H4VP-XUXU+SFE670-1-1 |
| AZ16-12ZI-B1-1747-M20 |
SCHMERSAL |
2023+ |
switch |
Safety switches |
| RX2025GE1 |
Surio |
2023+ |
connector |
Extract, Remove, and Insert Tools Contact extraction tool #16 |
| 5106.021.09.24 |
Surio |
2023+ |
connector |
Extract, remove, and insert tools Extract tool with pop-up |
| ABMPSE06T28M4SV0N |
AB Connectors |
2023+ |
connector |
Plug with RFI Ground |
| ABMPSE06T36M2SV0N |
AB Connectors |
2023+ |
connector |
Plug with RFI Ground |
| ABMP18T28M13SV0N |
AB Connectors |
2023+ |
connector |
RAIL AND MILITARY LAND SYSTEMS |
| ABCIRHSE06JE1812SCNF80M32V0 |
AB Connectors |
2023+ |
connector |
Halogen Free Bayonet Lock Connector Series |
| TSW-101-06-LM-D |
samtec |
2023+ |
connector |
Classic PCB Header Strips, 0.100" pitch |
| TNL22ERT-62 |
ABB |
2016+ |
Contactors |
4P St Contactor Relay 77-143Vdc |Abb TNL22ERT-62 |
| 62EM1-00001 |
Microchip |
2023+ |
Development board |
AgileSwitch® 62mm Electrical Master SiC Gate Driver Board |
| E2E-X7D212-R2M |
Omron |
2023+ |
sensor |
Standard Proximity Sensor |
| E2E-X7D212-R5M |
Omron |
2023+ |
sensor |
Standard Proximity Sensor |
| E2E-X7D112-R5M |
Omron |
2023+ |
sensor |
Standard Proximity Sensor |
| E2E-X7D112-R2M |
Omron |
2023+ |
sensor |
Standard Proximity Sensor |
| E2E-X7D112-R |
Omron |
2023+ |
sensor |
Standard Proximity Sensor |
| AF16ZB-30-10RT-23 |
ABB |
2023+ |
Contactors |
Contactor 48-130V50/60HZ-DC Contactor |
MAXIM BRAND PRODUCT RECOMMENDATIONS
| Model |
Manufacturers |
lot number |
encapsulation |
illustrate |
| DS9100A |
MAXIM |
12+ |
usd |
Touch and hold the probe stamping |
| DS9490R |
MAXIM |
12+ |
USB |
USB 1-Wire/I button adapter |
| DS1402D-41 |
MAXIM |
11+ |
SOP |
iButton probe blue dot assembly |
| DS1961S |
Maxim |
12+ |
SOIC-6 |
1024-bit EEPROM |
| DS1921Z |
Maxim |
11+ |
SSOP16 |
Robust, self-sufficient system that measures temperature and records results |
| DS1921H |
Maxim |
11+ |
SSOP16 |
Robust, self-sufficient system that measures temperature and records results |
| DS1921G |
Maxim |
11+ |
SSOP16 |
Robust, self-sufficient system that measures temperature and records results |
| DS1922T |
MAXIM |
12+ |
F5iButton |
Temperature logger with push button with 8KB data logging memory |
| DS1922L |
MAXIM |
12+ |
F5iButton |
Temperature logger with push button with 8KB data logging memory |
| DS1972 |
MAXIM |
10+ |
F5 iButton |
1024-bit EEPROM |
| DS9108 |
MAXIM |
11+ |
CAN |
Concrete temperature monitoring |
| DS1922E |
MAXIM |
11+ |
CAN |
Temperature logger |
| DS1822-PAR |
MAXIM |
11+ |
SOP8 |
Digital thermometer with ±2°C accuracy over the -10°C to +85°C temperature range |
| DS1822 |
MAXIM |
11+ |
SOP8 |
Digital thermometer with ±2°C accuracy over the -10°C to +85°C temperature range |
| DS28EA00 |
MAXIM |
12+ |
MSOP-8 |
1-Wire digital thermometer |
| MAX31826 |
MAXIM |
12+ |
USOP |
Digital temperature sensor |
| DS2506 |
MAXIM |
12+ |
SOP8 |
1024位EPROM |
| DS2502-E64 |
MAXIM |
12+ |
TO-92-3 |
EPROM存储器与DS2502相互替代 |
| DS2430A |
MAXIM |
12+ |
TO-92 |
256位的1-Wire®EEPROM |
| DS2408 |
MAXIM |
12+ |
SOP-8 |
An 8-channel, programmable I/O 1-Wire® chip |