DS92LV1023EMQ

• 30-66 MHz single 10:1 serializer with 300-660 Mb/s throughput
• Robust bus LVDS serial data transmission with embedded clock for excellent noise immunity and low EMI
• "ESD protection for the output pins of the bus LVDS output pins of the 10 kV HBM
• Guarantee every data transmission cycle transition
• 低功耗
• Single-differential pairs eliminate multi-channel skew
• Flow through the lead-out lines for easy PCB layout
• Programmable clock edge triggering
• Shut down the power supply when the drive output impedance is high
• The bus LVDS serial output voltage is 27 load
• Small 28-pin SSOP package

illustrate

The DS92LV1023E is 300 to 6.6 million barrels/high-speed serial data transmitted through a unidirectional FR-4 printed circuit board backplane and balanced copper cable transmission S sequence. It converts into a single high-speed bus with a 10-bit width parallel LVCMOS/LVTTL data bus LVDS serial data stream with an embedded clock. This single serial data stream simplifies PCB design and reduces the cost of PCB size and number of layers by shrinking the data path. A single serial data stream also reduces cable size, number of connections, and eliminates clock-to-data and data-to-data distortion.

Proven DS92LV1023E deserializer with the 10-bit LVDS bus of any country in its specified frequency operating range. It has special ESD protection, selectable edge triggering of the clock pins, and a high impedance output in power-down mode.

The DS92LV1023E design is consistent with flow-through pins and the use of a 28-lead SSOP package to save usable space.