Detection method
|
Thru-beam type |
Regressive reflex |
Diffusion reflective type |
| project |
NPN output |
E3F3-T11 |
E3F3-R11 |
E3F3-R12 |
E3F3-D11 |
E3F3-D12 |
| E3F3-T16 |
E3F3-R16 |
E3F3-R17 |
E3F3-D16 |
E3F3-D17 |
| E3F3-T61 |
E3F3-R61 |
E3F3-R62 |
E3F3-D61 |
E3F3-D62 |
| E3F3-T66 |
E3F3-R66 |
E3F3-R67 |
E3F3-D66 |
E3F3-D67 |
| PNP output |
E3F3-T31 |
E3F3-R31 |
E3F3-R32 |
E3F3-D31 |
E3F3-D32 |
| E3F3-T36 |
E3F3-R36 |
E3F3-R37 |
E3F3-D36 |
E3F3-D37 |
| E3F3-T81 |
E3F3-T81 |
E3F3-T82 |
E3F3-T81 |
E3F3-T82 |
| E3F3-T86 |
E3F3-T86 |
E3F3-T87 |
E3F3-T86 |
E3F3-T87 |
| Detection distance |
5M |
3M (without M.S.R function) |
2M (with M.S.R function) |
0.1M |
0.3M |
| (When using E39-R1) |
(When using E39-R1) |
| Standard detection objects |
Opaque object: 11mm min |
Opaque object: 56mm min |
100×100mm white drawing paper |
| Should be poor |
－－ |
Less than 20% of the detection distance |
| Light source (wavelength) |
Infrared LED |
Red LED |
Infrared LED |
| Supply voltage |
DC 12~24V± 10% (p-p) 10% or less |
| Consumes current |
DC ：45mA Max |
DC ：25mA Max |
| Control the output |
Load supply voltage DC26.4V or less, load supply current 100mA or less (residual voltage 1V or less) |
| Protection circuits |
Power supply reverse/output short circuit |
| Response time |
Action/Reply 1.0ms or less each |
| Sensitivity adjustment |
not |
Yes |
| Ambient lighting |
Incandescent lamp 3000lx or less/daylight 10000lx or less |
| Ambient temperature |
When operating: -25~+55°C (with no icing) When storing: -30~+70°C (with no icing) |
| Ambient humidity |
When moving: 45%~85% (with no icing)RH When stored: 35%~95% (with no icing)RH |
| Insulation resistance |
20MΩ or more (500VDC) |
| Dielectric strength |
AC1000V or more At 50/60Hz, it is between the current carrying part and the housing for up to 1 minute |
| Vibration resistance (durable) |
10~55Hz, 1.5mm double width, reaching 1h in the X, Y, Z direction |
| Impact resistant (durable) |
500m/s2 double frame, 3 times in the X, Y, and Z directions |
| Protect the structure |
IEC60529 IP66 |
| Connection method |
Conductor pull-out type (standard wire length: 2m) / M12 connector |
| Light |
Action indicator (orange) [power indicator of light projector (orange)] |
| weight |
Wire type |
Metal case: 200gMAX |
Metal case: 100g MAX |
| Plastic housing: 170g MAX |
Plastic housing: 85g MAX |
| Connection head type |
Metal case: 120g MAX |
Metal case: 60g MAX |
| Plastic housing: 40g MAX |
Plastic housing: 20g MAX |
| Packaging method |
Nylon bag |
| material |
enclosure |
ABS or BRASS |
| lens |
PMMA |