| Detection method
Model
project |
Opposite type |
Regressive reflex type |
Diffusion reflection type |
Diffusion reflection type |
| E3JK
-5M□ |
E3JK
-5S3 |
E3JK
-R2M□ |
E3JK -R2S3 |
E3JK
-R4M□ |
E3JK -R4S3 |
E3JK -DS30M□ |
E3JK -DS30S3 |
| Detection distance |
5m |
2.5m (when using E39-R1) |
4m (when using E39-R1) |
300mm (White paper 100×100mm) |
| Standard detection objects |
Opaque material of φ14.8mm or more |
Opaque material of φ75mm or more |
—— |
| Differential distance |
—— |
less than 20% of the detection distance |
| pointing angle |
Projector and receiver: 3~20° each |
1～5° |
—— |
| Light source (luminous wavelength) |
Infrared photodiodes (950nm) |
Red LED (660nm) |
Infrared photodiodes (950nm) |
| Supply voltage |
DC12~240V±10% pulsation (p-p) less than 10%, AC24~240V±10% 50/60Hz |
| Current consumption |
DC |
3W or less |
2W or less |
| AC |
3W or less |
2W or less |
| Consumption voltage |
Vote and receive |
20mA or less |
| Control output |
Relay output: AC250V 3A (cosφ=1) or less, DC5V 10mA or more |
DC SSR Negative Common Terminal DC48V 100mA or less Leakage current below 0.1mA with load short circuit protection |
Relay output: AC250V 3A (cosφ=1) or less, DC5V 10mA or more |
DC SSR Negative Common Terminal DC48V 100mA or less Leakage current below 0.1mA with load short circuit protection |
Relay output: AC250V 3A (cosφ=1) or less, DC5V 10mA or more |
DC SSR Negative Common Terminal DC48V 100mA or less Leakage current below 0.1mA with load short circuit protection |
Relay output: AC250V 3A (cosφ=1) or less, DC5V 10mA or more |
DC SSR Negative Common Terminal DC48V 100mA or less Leakage current below 0.1mA with load short circuit protection |
| Lifetime (Relay Output) |
machine |
More than 50 million times (opening and closing frequency 18,000 times/hour) |
| electric |
More than 100,000 times (opening and closing frequency 1,800 times/hour) |
| Answer time |
30ms or less |
10ms or less |
30ms or less |
5ms or less |
30ms or less |
5ms or less |
30ms or less |
5ms or less |
| Sensitivity adjustment |
—— |
Single swing switch |
| Use ambient illuminance |
Illuminance of the light surface Incandescent lamp: 3,000lx or less |
| ambient temperature |
When operating: -25~+55°C, when stored: -30~+70°C (no freezing, no condensation) |
| Ambient humidity |
When acting: 45~85%RH, when stored: 35~95%RH (non-condensing) |
| Insulation resistance |
20MΩ or more (DC500V megaohmmeter) |
| Withstand voltage |
AC1,500V 50/60Hz 1min |
| vibration |
durable |
10~55Hz up and down amplitude 1.5mm X, Y, Z directions for 2h |
| Misoperation |
10~55Hz up and down amplitude 1.5mm X, Y, Z directions for 2h |
| impact |
durable |
500m/s2 3 times in each direction of X, Y and Z |
| Misoperation |
100m/s2 3 times in each direction of X, Y, and Z |
500m/s2 3 times in each direction of X, Y and Z |
100m/s2 3 times in each direction of X, Y, and Z |
500m/s2 3 times in each direction of X, Y and Z |
100m/s2 3 times in each direction of X, Y, and Z |
500m/s2 3 times in each direction of X, Y and Z |
100m/s2 3 times in each direction of X, Y, and Z |
500m/s2 3 times in each direction of X, Y and Z |
| Protect the structure |
IEC specification IP64 |
| Connection |
Wire Lead Type (Standard Wire Length 2m) |
| Quality (Bundle Status) |
Approx. 420g |
Approx. 250g |
| Material |
enclosure |
ABS |
| Lens section |
Acrylate resin |
| Metal mounting fittings |
iron |
| accessory |
Metal mounting fittings (with screws), nuts, instruction manual, reflector (regressive reflection type only) |