| Item model |
Detection method |
Distance setting type |
| NPN output |
E3Z-LS61 |
E3Z-LS66 |
E3Z-LS63 |
E3Z-LS68 |
| PNP output |
E3Z-LS81 |
E3Z-LS86 |
E3Z-LS83 |
E3Z-LS88 |
| Detection range |
BGS |
20mm~Setting distance (white paper, black paper 100×100mm) |
2mm~Setting distance (80mm or less) |
| FGS |
Set distance ~200mm or more
White paper 100×100mm) setting
Distance ~160mm or more (black paper 100×
100mm） |
— |
| Set the range |
40~200mm (100× white paper.)
100mm) 40~160mm (black paper
100×100mm） |
20~80mm (white paper 100×100mm) |
| Differential |
Set distance of less than 10% (→ reference
Page 154, "Differential Distance—Characteristics") |
Set the distance to 2% or less |
| Reflectivity characteristics |
(Black and white error) 10% or less of the set distance |
Set the distance to 5% or less |
| Light source (luminous wavelength) |
Red LED (680nm) |
Red LED (650nm) |
| Supply voltage |
DC12~24V±10% pulsation (p-p) less than 10%. |
| Current consumption |
Below 30mA |
| Control the output |
Load supply voltage DC26.4V or less, load current 100mA or less (residual voltage 1V or less)
Open collector output (NPN/PNP output varies depending on form)
ON/MFN switching type when entering light/shielding light |
| BGS/FGS conversion inputs |
BGS Feature: Open or Connect in GND FGS Feature: Vcc Connection |
BGS function: Open or connected in GND |
| Protection circuits |
Power reverse connection protection, output short circuit protection, prevent mutual interference function |
| Response time |
Action and response: 1ms or less each |
| Distance setting |
5 cycles, buttons |
| Use ambient illumination |
Incandescent lamp with illumination surface: 3,000lx or less, sunlight: 10,000lx or less |
| Ambient temperature |
During operation: -25~+55°C, when stored: -40~+70°C (no icing and condensation) |
| Ambient humidity |
When operating: 35~85%RH, when storing: 35~95%RH (non-condensing) |
| Insulation resistance |
20MΩ or more (DC500V megohmmeter) |
| Withstand pressure |
AC1,000V 50/60Hz 1min |
| Vibration (durable) |
10~55Hz complex amplitude 1.5mm X, Y, Z 2h in all directions |
| Impact (durable) |
500m/s2 3 times in all directions of X, Y, Z |
| Protect the structure |
IEC specification IP67 |
| Connection method |
Pull type (mark
Gauge length 2m/0.5m) |
M8 connected type |
Cable pull type (standard
Wire length 2m/0.5m) |
M8 connected type |
| Display light |
Action display light (orange) Steady display light (green) |
| Quality (bale status) |
Approx. 65g (cable pull 2m type) |
Approx. 20g |
Action display light (orange) Steady display light (green) |
Approx. 20g |
| Material |
enclosure |
Polybutylene terephthalate |
| Lens Department |
Spoiled methapropylene resin |
| accessory |
Instruction Manual Note: Metal mounting accessories are sold separately |