| Model
project |
EE-SPX302-W2A、EE-SPX402-W2A
EE-SPX304-W2A、EE-SPX404-W2A
EE-SPX306-W2A、EE-SPX406-W2A |
EE-SPX305-W2A
EE-SPX405-W2A |
| Detection distance |
3.6mm (groove width) |
5mm (slot width) |
| Standard detection distance |
1× Opaque body of more than 0.5mm |
2× Opaque objects above 0.8mm |
| Distance should be different |
Less than 0.05mm |
| Light source (maximum luminous wavelength) |
GaAs Infrared Light Emitting Diode (Pulsed Light) (940nm) |
| Display light*2 |
Light on when light is in (red) |
| Supply voltage |
DC5~24V±10%, pulsation (p-p) less than 5% |
| Current consumption |
The average value is less than 15mA, and the front-end value is less than 50mA |
| Control output |
NPN voltage output Load supply voltage DC5~24V, load current below 80mA
Residual voltage 1.0V or less (at load current 80mA)
Residual voltage 0.4V or less (at load current 10mA) |
| Response frequency*3 |
500Hz or higher |
100Hz or higher |
| Use ambient illuminance |
Illuminance of the light surface Incandescent lamp, sunlight: 3,000 lx or less |
| Ambient temperature |
When operating: -10~+55°C, when stored: -25~+65°C (without freezing) |
| Ambient humidity |
When acting: 5~85%RH, when saving: 5~95%RH (non-condensing) |
| Vibration (durable) |
10~55Hz up and down amplitude 1.5mm X, Y, Z directions for 2h |
| Impact (Durable) |
500m/s2 3 times in each direction of X, Y and Z |
| Protect the structure |
IEC specification IP50 |
| Connection |
Wire lead type (standard wire length 1m) |
| quality |
18.5g |
| Material |
enclosure |
Polycarbonate |
| Fixture Department |