Detection method
Item model |
Thru-beam type (groove type) |
Reflective type |
| EE-SPX301、EE-SPX401 |
EE-SPY301、EE-SPY401
EE-SPY302、EE-SPY402 |
| Detection distance |
3.6mm (groove width) |
5mm (reflectivity 90% 15×15mm white paper)*1 |
| Standard detection objects |
Opaque body above 1×0.5mm |
—— |
| Difference distance |
0.05mm or less |
0.2mm (detection distance 3mm, horizontal direction) or less |
| Light source (luminous wavelength) |
GaAs infrared light-emitting diode (940nm) |
| Display light*2 |
Light on when entering the light (red) |
| Supply voltage |
DC5~24V±10%, pulsation (p-p) 5% or less |
| Consumes current |
The average value is 15mA or less, and the front value is 50mA or less |
| Control the output |
NPN voltage output load supply voltage DC5~24V, load current 80mA or less
Residual voltage 1.0V or less (at 80mA load current)
Residual voltage 0.4V or less (at 10mA load current) |
| Response frequency*3 |
Above 500Hz |
100Hz or more |
| Use ambient illumination |
Illuminance of light-receiving surface Incandescent lamp, sunlight: 3,000lx or less |
| Ambient temperature |
When operating: -10~+55°C, when storing: -25~+65°C (no freezing) |
| Ambient humidity |
When operating: 5~85%RH, when storing: 5~95%RH (no condensation) |
| Vibration (durable) |
10~55Hz complex amplitude 1.5mm X, Y, Z 2h in all directions |
| Impact (durable) |
500m/s2 3 times in all directions of X, Y, Z |
| Protection Construct |
IEC specification IP50 |
| Connection method |
Connector type (soldering is not possible) |
| quality |
Approx. 2.6g |
| Material |
enclosure |
Polycarbonate (PC) |