| Detection method item model |
Shot type (groove type) |
Reflective type |
| EE-SPX301、EE-SPX401 |
EE-SPY301、EE-SPY401EE-SPY302、EE-SPY402 |
| Detection distance |
3.6mm (groove width) |
5mm (reflectivity 90% 15×15mm white paper)*1 |
| Standard detection objects |
1× Opaque body of more than 0.5mm |
—— |
| Distance should be different |
Less than 0.05mm |
0.2mm (detection distance 3mm, transverse) or less |
| Light source (luminous wavelength) |
GaAs Infrared Light Emitting Diode (940nm) |
| Display light*2 |
Light on when light is in (red) |
| Supply voltage |
DC5~24V±10%, pulsation (p-p) less than 5% |
| Current consumption |
The average value is less than 15mA, and the front-end value is less than 50mA |
| Control output |
NPN Voltage Output Load supply voltage DC5~24V, load current 80mA or less Residual voltage 1.0V or less (load current 80mA) Residual voltage 0.4V or less (load current 10mA) |
| Response frequency*3 |
500Hz or higher |
100Hz or higher |
| Use ambient illuminance |
Illuminance of the light surface Incandescent lamp, sunlight: 3,000 lx or less |
| Ambient temperature |
When operating: -10~+55°C, when stored: -25~+65°C (without freezing) |
| Ambient humidity |
When acting: 5~85%RH, when saving: 5~95%RH (non-condensing) |
| Vibration (durable) |
10~55Hz repetition amplitude 1.5mm X, Y, Z directions for 2h |
| Impact (Durable) |
500m/s2 3 times in each direction of X, Y and Z |
| Protect the structure |
IEC specification IP50 |
| Connection |
Connector type (soft brazing is not possible) |
| quality |
Approx. 2.6g |
| Material |
enclosure |
Polycarbonate (PC) |