Model
project |
class |
Standard type |
L-shaped |
T-shaped |
| NPN |
EE-SX770 EE-SX870
EE-SX770A EE-SX870A |
EE-SX771 EE-SX871
EE-SX771A EE-SX871A |
EE-SX772 EE-SX872
EE-SX772A EE-SX872A |
| PNP |
EE-SX770P EE-SX870P
EE-SX770R EE-SX870R |
EE-SX771P EE-SX871P
EE-SX771R EE-SX871R |
EE-SX772P EE-SX872P
EE-SX772R EE-SX872R |
| Detection distance |
5mm (groove width) |
| Standard detection distance |
Opaque body 2×0.8mm or more |
| Differential distance |
0.025mm |
| Light source (maximum luminous wavelength) |
GaAs infrared light-emitting diode (940nm) |
| Display light |
If the light is on (red) (type A and R are on when the light is blackout) |
| Supply voltage |
DC5~24V±10% pulsation (p-p) 10% or less |
| Consumes current |
35mA or less (NPN type), 30mA or less (PNP type) or less |
| Control the output |
NPN type: NPN open collector output DC5~24V 100mA or less
Residual voltage 0.8V or less (at 100mA load current), residual voltage 0.4V or less (at 40mA load current)
PNP type: PNP collector open circuit output DC5~24V 50mA or less Residual voltage 1.3V or less (when load current 50mA) |
| Response frequency*
|
1kHz or more (average: 3kHz) |
| Use ambient illumination |
Illuminance of light-receiving surface fluorescent lamp 1,000lx or less |
| Ambient temperature |
When operating: -25~+55°C When storing: -30~+80°C (no freezing) |
| Ambient humidity |
When operating: 5~85%RH When storing: 5~95%RH (no condensation) |
| Vibration (durable) |
20~2,000Hz (Maximum acceleration 100m/s2 )
Complex amplitude 1.5mm X, Y, Z in all directions 2h (4min cycle) |
| Impact (durable) |
500m/s2 3 times in all directions of X, Y, Z |
| Protection Construct |
IEC specification IP60 |
| Connection method |
Conductor exit type (standard length 2m) |
| Quality (bale status) |
Approx. 20g |
| Material |
enclosure |
Polybutylene terephthalate (PBT) |