Condensation Monitor
The EE046-T11 condensation monitor helps to prevent condensation on critical cold spots. With the help of its relative humidity
(RH) sensing element, it reliably detects the danger of condensation just before it occurs.
Mounting Options
The EE046-T11 is available in two variants. The wall / pipe mount type is appropriate for installation on flat surfaces and on
pipes with a maximum diameter of 50 mm (2”). It is mounted on cooling ceilings, on cooling or cold water piping, cooled
surfaces and chilled beams. The snap-on type can be mounted on plastic and aluminium composite pipes with 16 mm or
20 mm diameter. It’s typical applications are cooling and heating by concrete core activation.
Reliable Anti-Condensation Safe Guard
Condensation on a surface occurs when the relative humidity of the air close to the surface reaches 100 %RH. Because of
the very good thermal coupling with the surface, the EE046-T11 measures the RH of the air directly at surface temperature. Its
properties make it the ideal choice for applications where control guards are required to prevent dripping or mould.
Early Detection of Condensation Risk
The relay output provides an early warning before condensation actually happens. It also indicates a power supply failure
or a broken cable. A status LED indicates normal operation, alarm or power supply failure. The E+E proprietary coating
protects the humidity sensor against dust and dirt
The EE046-T11 Condensation Monitor helps prevent condensation at critical cold spots. With its relative humidity (RH) sensing element, it reliably detects the risk of condensation and prevents it from occurring.
Surface condensation occurs when the relative humidity of the air near the surface reaches 100 %RH. Due to the excellent thermal coupling with the surface, the EE046 measures the RH of the air directly at the surface temperature. Its properties make it ideal for applications where a controlled guard is required to prevent dripping or mold.
The relay output provides early warning before condensation actually occurs. It also indicates a faulty power supply or damaged cable. Status LEDs indicate normal operation, alarms, or power failures. E+E proprietary coating protects the humidity sensor from dust and dirt.