EL5144

• Rail-to-rail output swing
• -3dB bandwidth = 100MHz - 3dB bandwidth = 100MHz
• Single-supply +5V operation
• Power-down to 2.6μA power-down to 2.6μA
• Large input common-mode range 0V 大的输入共模范围为0V 厘米
• Diff gain/phase = 0.1%/0.1° Differential gain/phase = 0.1%/0.1°
• Low power 35mW per amplifier
• Space-saving SOT23-5, 8 Ld MSOP and 10 Ld MSOP, and 16 Ld QSOP packages Space-saving SOT23 - 5, 8-pin MSOP and 10-pin MSOP and 16 Ld in QSOP packages
• Pb-Free available (RoHS compliant)

The EL5144 series amplifiers are voltage-feedback, high speed, rail-to-rail amplifiers designed to operate on a single +5V supply. They offer unity gain stability with an unloaded -3dB bandwidth of 100MHz. The input common-mode voltage range extends from the negative rail to within 1.5V of the positive rail. Driving a 75W double terminated coaxial cable, the EL5144 series amplifiers drive to within 150mV of either rail. The 200V/μs slew rate and 0.1%/0.1° differential gain/differential phase makes these parts ideal for composite and component video applications. The 200V/μs slew rate and 0.1%/0.1° differential gain/ Differential phase makes these parts ideal for compound and component video applications. With their voltage feedback architecture, these amplifiers can accept reactive feedback networks, allowing them to be used in analog filtering applications These amplifiers will source 90mA and sink 65mA. Due to their voltage feedback architecture, these amplifiers can accept a reactive feedback network, allowing them to use these amplifiers in analog filtering applications to combine the source and sink 65mA and 90mA.

The EL5146 and EL5246 have a power-savings disable feature. The EL5146 and EL5246 have a power-saving disabled function. Applying a standard TTL low logic level to the CE (Chip Enable) pin reduces the supply current to 2.6μA within 10ns. Turn-on time is 500ns, allowing true break-before-make conditions for multiplexing applications. Allowing the CE pin to float or applying a high logic level will enable the amplifier.

For applications where board space is critical, singles are offered in a 5 Ld SOT-23 package, duals in 8 Ld and 10 Ld MSOP packages, and quads in a 16 Ld QSOP package. Quad dual op amps are available in 8-pin and 10-pin MSOP packages, and 16 Ld in QSOP packages. Singles, duals, and quads are also available in industry standard pinouts in SO and PDIP packages. All parts operate over the industrial temperature range of -40°C to +85°C

• Video amplifiers
• 5V analog signal processing 5V analog signal processing
• Multiplexers
• Line drivers
• Portable computers
• High speed communications
• Sample and hold amplifiers