home page>Product Center> Current parallel monitor

Product images are for illustrative purposes only
Product details are welcome upon request

INA138-Q1

Category:Current parallel monitor
Product Name:Automotive high-side measurement current parallel monitor, current output
Manufacturers:TI
Production Batch Number:10+
Encapsulation:8TSSOP
Stock Status:There is stock
Stock Quantity:11668
Minimum order quantity: 1
Details:

Product introduction

The INA138 and INA168 are high-side, unipolar, current-shunt monitors.With wide common-mode input voltage, low quiescent current and SOT23, tiny TSSOP packages enable use in a variety of applications.

The common-mode input and supply voltages are independent and can range from INA138 to 36 V at 2.7 V and INA168 V from 2.7 V to 60.Currently only 25μA is stationary, which allows the current measurement shunt to be connected to either side with minimal error.

The device outputs differential input voltages and currents.This is converted into a current voltage set in an external load resistor to gain anything from 1 to 100 bits.Although designed for current shunt measurements, creative application circuits invite metering and level changes.

characteristic

Competent for automotive applications
ESD protection for more than 2000 years per MIL-STD-883 3015 V Act;
More than 200 V using machine models (C = 200 pF, R = 0)
Complete unipolar high-side current measurement circuit
Wide range of supply and common modes
- INA138 2.7 V:36 V
- INA168: 2.7 V to 60 V
Independent common-mode input voltage supply and
Single resistor gain setting
25μA Low Electrostatic Flow (Current)
Wide temperature range: -40°C to +125°C
TSSOP.8 SOT23.5 parcel,
apply
- Measure current shunting
- Portable and Battery-Backup system
- Battery charger
- power management
- Precision current source

parameter

	INA138-Q1
Gain (V/V)	1 to 100
Common Mode Input Range (Min)(V)	2.7 ~ 36
Input bias (+/-)(max) (uV)	In 2000
Input bias drift (+/-) (max) (uV/Celsius)	1
Thus (Min)(dB)	100
Small-Signal bandwidth (streaming) (MHz)	0.8
Quiescent current (+/-)(current)(mA)	0.025
Pair (Min)(V)	270
Pair (Max) (V)	36
Operating temperature range(°C)	- 40 to 125
Pin/Pack	8TSSOP

andINA138-Q1Related ICs are:

Model	Manufacturers	lot number	encapsulation	illustrate
INA169	TI	10+	5SOT-23	High-side measurement current parallel monitor, current output
INA168-Q1	TI	09+	5SOT-23, 8TSSOP	Automotive high-side measurement current parallel monitor, current output
INA168	TI	09+	5SOT-23	High current measurement parallel monitor, current output
INA139-Q1	TI	10+	8TSSOP	Automotive high-side parallel monitor for measuring current
INA139	TI	10+	5SOT-23	High-side measurement current parallel monitor, current output
INA138	TI	10+	5SOT-23	High-side measurement current parallel monitor, current output
LM234	ST	10+	SOP8	Three-terminal adjustable current source
INA330	TI	09+	10MSOP	Thermistor signal amplifier for temperature control
INA2322	TI	09+10+	14TSSOP	Micropower single-supply CMOS instrumentation amplifier
1N457	FAIRCHILD	11+	DO-35	High conductivity and low leakage diodes

Popular searches

Model	Manufacturers	lot number	encapsulation	illustrate
PW70d(2x10432Ω/83°）	FSG	2023+	potentiometer	PW70D(2*1043Ω 1%/83°）（1700Z04-257.106)
PW70d	FSG	2023+	potentiometer	PW70D(2*1043Ω 1%/83°）（1700Z04-257.106)
S34ML16G202BHI000	Flip Electronics	2051+	63BGA	16 Gb, 3 V, 4-bit ECC, x8 I/O, SLC NAND Flash Memory for Embedded
FRCIR06RGG18-20S-F80-V0-M20-1.5F	ITTVEAM	2023+	connector	Connectors, Circular Connectors, Circular Plugs & Receptacles
CL1215-02P72ET-U2	Schaltbau	2023+	Contactors	CL1215/02 P 72ET-U2 1, 2 and 3 pole AC and DC NO contactors for voltages up to 1,500 V
CL1115-02P72ET-U2	Schaltbau	2023+	Contactors	1, 2 and 3 pole AC and DC NO contactors for voltages up to 1,500 V
D-U204N-KLGQ	Mors Smitt	2023+	Relays	No magnetic arc blow-out
D-U204N-KLCQ	Mors Smitt	2023+	Relays	No magnetic arc blow-out
MIP30F00830-S1048	Amphenol Positronic	2023+	connector	MIP series connectors
C163C/110EV-R1	Schaltebao	2023+	Contactors	Contactors
F670-H4V-XUU	LEACH	2023+	Relays	F670-H4V-XUU+SHKE470-110-AD
F670-H4VP-XUXU	LEACH	2023+	Relays	F670-H4VP-XUXU+SFE670-1-1
AZ16-12ZI-B1-1747-M20	SCHMERSAL	2023+	switch	Safety switches
RX2025GE1	Surio	2023+	connector	Extract, Remove, and Insert Tools Contact extraction tool #16
5106.021.09.24	Surio	2023+	connector	Extract, remove, and insert tools Extract tool with pop-up
ABMPSE06T28M4SV0N	AB Connectors	2023+	connector	Plug with RFI Ground
ABMPSE06T36M2SV0N	AB Connectors	2023+	connector	Plug with RFI Ground
ABMP18T28M13SV0N	AB Connectors	2023+	connector	RAIL AND MILITARY LAND SYSTEMS
ABCIRHSE06JE1812SCNF80M32V0	AB Connectors	2023+	connector	Halogen Free Bayonet Lock Connector Series
TSW-101-06-LM-D	samtec	2023+	connector	Classic PCB Header Strips, 0.100" pitch

TI brand product recommendation

Model	Manufacturers	lot number	encapsulation	illustrate
INA138	TI	10+	5SOT-23	High-side measurement current parallel monitor, current output
INA330	TI	09+	10MSOP	Thermistor signal amplifier for temperature control
INA2322	TI	09+10+	14TSSOP	Micropower single-supply CMOS instrumentation amplifier
INA2321	TI	08+	14TSSOP	Micropower single-supply CMOS instrumentation amplifier
INA2143	TI	09+	14SOIC	High speed precision G = 10 or G = 0.1 difference amplifier
INA2141	TI	08+	16SOIC	Dual, low-power G = 10,100 instrumentation amplifiers
INA2137	TI	10+	14PDIP, 14SOIC	Audio differential line receiver, +-6dB (G=1/2 or 2)
INA2134	TI	09+	14PDIP, 14SOIC	Audio Differential Line Receiver, 0dB (G=1)
INA2133	TI	10+	14SOIC	High speed precision difference amplifier
INA2132	TI	10+	14SOIC	Dual, low-power, single-supply difference amplifiers
INA2128	TI	09+	16SOIC	Dual low-power instrumentation amplifiers
INA159-EP	TI	10+	8MSOP	Enhanced 0.2-stage precision gain difference amplifier
INA159	TI	10+	8MSOP	High speed 0.2-stage precision gain difference amplifier
INA157	TI	10+	8SOIC	High speed precision difference amplifier
INA154	TI	10+	8SOIC	High Speed Precision Difference Amplifier (G = 1)
INA152	TI	07+	8MSOP	Single-supply difference amplifier
INA146	TI	08+	8SOIC	High voltage programmable gain difference amplifier
INA145	TI	09+	8SOIC	Programmable gain difference amplifier
INA143	TI	10+	8SOIC	High speed precision G = 10 or G = 0.1 difference amplifier
INA137	TI	10+	8PDIP, 8SOIC	Audio differential line receiver, +-6dB (G=1/2 or 2)