home page>Product Center> Single power supply

Product images are for illustrative purposes only
Product details are welcome upon request

INA163

Category:Single power supply
Product Name:Low noise and low distortion instrumentation amplifier
Manufacturers:TI
Production Batch Number:10+
Encapsulation:14SOIC
Stock Status:There is stock
Stock Quantity:5000
Minimum order quantity: 1
Details:

Product introduction

The INA163 is a very low noise, low distortion, monolithic instrumentation amplifier. Its current feedback circuit achieves a very wide gain bandwidth and excellent dynamic response. It is ideal for low-level audio signals such as balanced low-impedance microphones. Many industrial, instrumentation and medical applications also benefit from its low noise and wide bandwidth.

Unique distortion cancellation circuitry reduces extremely low levels of distortion, even at high gains. The INA163 offers nearly 200 theoretical noise performances Source impedance. Its differential inputs, low noise and low distortion provide superior performance for professional microphone amplifier applications.

The INA163's wide supply voltage, excellent output voltage swing and high output current drive allow it to be used in advanced audio stages.

characteristic

Low noise: 1nV / Hertz at 1kHz
Low THD + N: 0.002%, at 1kHz, gram = 100
Wide bandwidth: G 800kHz = 100
Wide supply range: ± 4.5V to ± 18V
High CMR: > 100dB
The gain sets the external resistor
Su-14 surface mount package
apply
- Professional microphone preamp
- Dynamic transducer amplifier
- Differential receiver
- Bridge sensor amplifier

parameter

	INA163
CMRR (minimum) (decibels)	100
Pins/Packets	14SOIC
Maximum input offset (+/-)()(UV)	250
Typical input offset drift (+/-)((UV/Celsius)	One
Maximum input bias current (+/-)()(sodium)	12000
Noise at 1kHz (typical) (Nevada/√ Hz)	One
Quiescent current (+/-)(typical) (mA)	10
Settling time to 0.01% (typical) (US)	3.5
Gain (V/V).	1 to 10000
Input type	Bipolar
Nonlinearity (+/-)(max)(%)	0.0006
Output offset (+/-)(max) (UV)	5000/g
Output offset drift (+/-)(typical) (UV/Celsius)	20/g
Operating temperature range(°C)	-40 to 85

andINA163Related ICs are:

Model	Manufacturers	lot number	encapsulation	illustrate
PHW80NQ10T	NXP	2011+	TO-3P	Enhanced FET logic levels
PMV60EN	NXP	2011+	SOT23-3	Enhanced FET logic levels
TPS54283	TI	2010+	TSSOP14	2A DUAL NON-SYNCHRONOUS CONVERTER
TPS54262-Q1	TI	10+	20HTSSOP	Automotive 2A, 60V step-down DC/DC converter with low IQ, voltage monitoring, and reset
INA217	TI	10+	16SOIC, 8PDIP	A low-noise, low-distortion instrumentation amplifier to replace the SSM2017
INA156	TI	09+10+	8MSOP	Single-supply, rail-to-rail output CMOS instrumentation amplifier
TPS54260	TI	10+	MSOP-10	3.5V to 60V input, 2.5A buck converter with Eco-Mode
TPS54240	TI	10+	MSOP-10	3.5V to 42V input, 2.5A buck converter with Eco-Mode
TPS54233	TI	2011+	SOIC-8	3.5V to 28V input, 2A, 1MHz buck converter with Eco-mode
INA155	TI	10+	8MSOP, 8SOIC	Single-supply, rail-to-rail output, CMOS instrumentation amplifier

Popular searches

Model	Manufacturers	lot number	encapsulation	illustrate
PW70d(2x10432Ω/83°）	FSG	2023+	potentiometer	PW70D(2*1043Ω 1%/83°）（1700Z04-257.106)
PW70d	FSG	2023+	potentiometer	PW70D(2*1043Ω 1%/83°）（1700Z04-257.106)
S34ML16G202BHI000	Flip Electronics	2051+	63BGA	16 Gb, 3 V, 4-bit ECC, x8 I/O, SLC NAND Flash Memory for Embedded
FRCIR06RGG18-20S-F80-V0-M20-1.5F	ITTVEAM	2023+	connector	Connectors, Circular Connectors, Circular Plugs & Receptacles
CL1215-02P72ET-U2	Schaltbau	2023+	Contactors	CL1215/02 P 72ET-U2 1, 2 and 3 pole AC and DC NO contactors for voltages up to 1,500 V
CL1115-02P72ET-U2	Schaltbau	2023+	Contactors	1, 2 and 3 pole AC and DC NO contactors for voltages up to 1,500 V
D-U204N-KLGQ	Mors Smitt	2023+	Relays	No magnetic arc blow-out
D-U204N-KLCQ	Mors Smitt	2023+	Relays	No magnetic arc blow-out
MIP30F00830-S1048	Amphenol Positronic	2023+	connector	MIP series connectors
C163C/110EV-R1	Schaltebao	2023+	Contactors	Contactors
F670-H4V-XUU	LEACH	2023+	Relays	F670-H4V-XUU+SHKE470-110-AD
F670-H4VP-XUXU	LEACH	2023+	Relays	F670-H4VP-XUXU+SFE670-1-1
AZ16-12ZI-B1-1747-M20	SCHMERSAL	2023+	switch	Safety switches
RX2025GE1	Surio	2023+	connector	Extract, Remove, and Insert Tools Contact extraction tool #16
5106.021.09.24	Surio	2023+	connector	Extract, remove, and insert tools Extract tool with pop-up
ABMPSE06T28M4SV0N	AB Connectors	2023+	connector	Plug with RFI Ground
ABMPSE06T36M2SV0N	AB Connectors	2023+	connector	Plug with RFI Ground
ABMP18T28M13SV0N	AB Connectors	2023+	connector	RAIL AND MILITARY LAND SYSTEMS
ABCIRHSE06JE1812SCNF80M32V0	AB Connectors	2023+	connector	Halogen Free Bayonet Lock Connector Series
TSW-101-06-LM-D	samtec	2023+	connector	Classic PCB Header Strips, 0.100" pitch

TI brand product recommendation

Model	Manufacturers	lot number	encapsulation	illustrate
INA156	TI	09+10+	8MSOP	Single-supply, rail-to-rail output CMOS instrumentation amplifier
TPS54260	TI	10+	MSOP-10	3.5V to 60V input, 2.5A buck converter with Eco-Mode
TPS54240	TI	10+	MSOP-10	3.5V to 42V input, 2.5A buck converter with Eco-Mode
TPS54233	TI	2011+	SOIC-8	3.5V to 28V input, 2A, 1MHz buck converter with Eco-mode
INA155	TI	10+	8MSOP, 8SOIC	Single-supply, rail-to-rail output, CMOS instrumentation amplifier
INA125	TI	08+	16PDIP, 16SOIC	Instrumentation amplifier with precision voltage reference
INA122	TI	10+	8PDIP, 8SOIC	Single-supply micropower instrumentation amplifier
TPS54232	TI	1001+	SOP8	3.5V to 28V input, 2A, 300kHz buck converter with Eco-mode
TPS54228	TI	10+	SOP	4.5V to 18V input to 2A synchronous step-down SWIFT converter with light load efficiency
TPS54227	TI	10+	SOP	4.5V to 18V input, 2A synchronous step-down SWIFT converter
TPS54226	TI	10+	TSSOP14	4.5V to 18V input, 2A synchronous step-down DCAP2 mode converter with Eco-Mode
TPS54225	TI	10+	HTSSOP14	4.5V to 18V Input 2A Synchronous Step-Down DCAP2 Mode Converter
TPS54218	TI	2010+	WQFN16	2.95V to 6V input, 2A synchronous buck converter
TPS5420-Q1	TI	10+	SOP8	Automotive 5.5V to 36V input, 2A buck converter
TPS5420-EP	TI	10+	8SOIC	Enhanced 5.5V to 36V input, 2A, 500kHz buck converter
TPS54162-Q1	TI	10+	20HTSSOP	Automotive class 1A, 60V step-down DC/DC converter with low IQ, voltage monitoring and reset
INA118	TI	10+	8PDIP, 8SOIC	Precision low-power instrumentation amplifiers
INA103	TI	10+	16PDIP, 16SOIC	Low noise, low distortion instrumentation amplifiers
TPS54160-Q1	TI	10+	10MSOP	Automotive 3.5V to 60V, 1.5A step-down SWIFT(tm) converter with Eco-Mode(tm).
TPS54160	TI	10+	TSSOP10	0.5A buck converter with 3.5V to 60V input in eco mode