home page>Product Center> Current parallel monitor

Product images are for illustrative purposes only
Product details are welcome upon request

INA210

Category:Current parallel monitor
Product Name:Voltage output, high/low-side measurement, bidirectional zero-drift series current parallel monitors
Manufacturers:TI
Production Batch Number:10+
Encapsulation:10UQFN, 6SC70
Stock Status:There is stock
Stock Quantity:6000
Minimum order quantity: 1
Details:

Product introduction

The INA210, INA211, INA212, INA213, INA214 are voltage and output current shunt monitors that can sense the opposite side of the common-mode voltage shunt droplets from -0.3V to 26V, independent of the supply voltage. Five fixed incomes are available: 50V Audio/Video, 100V Audio/Video, 200V/V, 500V/V, or 1000V/Five The zero-drift architecture compensates for low currents by shunting up to 10mV of full-scale detection low-limit dips.

These devices operate from a single +2.7 V to +26 V supply and draw a maximum supply current of 100 μA. All versions are available in an extended operating temperature range (-40°C to +125°C) and in an SC70 package. The INA210, INA213, and INA214 are also available in a thin QFN package.

characteristic

Wide common-mode range: -0.3V to 26V
Offset Voltage: ±35μV (INA210 Max) (10mV Full-Scale Shunt Droplet Enabled)
precision
- ± 1% gain error (maximum over temperature)
- Offset drift of 0.5μV/°C (max.)
- Gain drift at 10ppm/°C (max.)
Selected gain:
- INA210: 200V audio/video
- INA211: Audio/Video at 500V
- INA212: 1000 volts/video
- INA213: 50V audio/video
- INA214: 100V audio/video
Quiescent Current: 100μA Max
SC70 package: all models
Thin QFN packages: INA210, INA213, INA214
apply
- laptop
- cell phone
- Telecommunications equipment
- power management

parameter

	INA210
Gain (V/V).	200
Common Mode Input Range (min) (5)	-0.3
Maximum input offset (+/-)()(UV)	35
Maximum input offset drift (+/-)((UV/Celsius)	0.5
CMRR (minimum) (decibels)	105
Small signal bandwidth (typical) (MHz)	0.014
Quiescent current (+/-)(typical) (mA)	0.065
and (min) (v)	2.7
and (maximum) (v)	26
Operating temperature range(°C)	-40 to 125
Pins/Packets	10UQFN，6SC70

andINA210Related ICs are:

Model	Manufacturers	lot number	encapsulation	illustrate
TPS54327	TI	1043+	SOIC-8	4.5V to 18V input, 3A synchronous step-down DCAP mode converter
TPS54326	TI	10+	TSSOP14	4.5V to 18V input, 3A synchronous step-down DCAP2 mode converter with Eco-Mode
INA212	TI	10+	6SC70	Voltage output, high/low-side measurement, bidirectional zero-drift series current parallel monitors
INA211	TI	10+	6SC70	Voltage output, high/low-side measurement, bidirectional zero-drift series current parallel monitors
TPS54325	TI	10+	TSSOP14	4.5V to 18V Input, 3A Synchronous Step-Down DCAP2 Mode Converter
TPS54320	TI	10+	14-VQFN	4.5V to 17V Input, 3A Synchronous Buck Converter
INA209	TI	08+	16TSSOP	High-side measurement, bidirectional current/power monitor with I2C interface
TPS54319	TI	2010+	QFN16	2.95V to 6V input, 3A synchronous buck converter
INA208	TI	10+	10MSOP, 14SOIC, 14TSSOP	High-side parallel monitor for measuring current with dual comparators
TPS54318	TI	10+	QFN-16	2.95V to 6V input, 3A synchronous buck converter

Popular searches

Model	Manufacturers	lot number	encapsulation	illustrate
S34ML16G202BHI000	Flip Electronics	2051+	63BGA	16 Gb, 3 V, 4-bit ECC, x8 I/O, SLC NAND Flash Memory for Embedded
FRCIR06RGG18-20S-F80-V0-M20-1.5F	ITTVEAM	2023+	connector	Connectors, Circular Connectors, Circular Plugs & Receptacles
CL1215-02P72ET-U2	Schaltbau	2023+	Contactors	CL1215/02 P 72ET-U2 1, 2 and 3 pole AC and DC NO contactors for voltages up to 1,500 V
CL1115-02P72ET-U2	Schaltbau	2023+	Contactors	1, 2 and 3 pole AC and DC NO contactors for voltages up to 1,500 V
D-U204N-KLGQ	Mors Smitt	2023+	Relays	No magnetic arc blow-out
D-U204N-KLCQ	Mors Smitt	2023+	Relays	No magnetic arc blow-out
MIP30F00830-S1048	Amphenol Positronic	2023+	connector	MIP series connectors
C163C/110EV-R1	Schaltebao	2023+	Contactors	Contactors
F670-H4V-XUU	LEACH	2023+	Relays	F670-H4V-XUU+SHKE470-110-AD
F670-H4VP-XUXU	LEACH	2023+	Relays	F670-H4VP-XUXU+SFE670-1-1
AZ16-12ZI-B1-1747-M20	SCHMERSAL	2023+	switch	Safety switches
RX2025GE1	Surio	2023+	connector	Extract, Remove, and Insert Tools Contact extraction tool #16
5106.021.09.24	Surio	2023+	connector	Extract, remove, and insert tools Extract tool with pop-up
ABMPSE06T28M4SV0N	AB Connectors	2023+	connector	Plug with RFI Ground
ABMPSE06T36M2SV0N	AB Connectors	2023+	connector	Plug with RFI Ground
ABMP18T28M13SV0N	AB Connectors	2023+	connector	RAIL AND MILITARY LAND SYSTEMS
ABCIRHSE06JE1812SCNF80M32V0	AB Connectors	2023+	connector	Halogen Free Bayonet Lock Connector Series
TSW-101-06-LM-D	samtec	2023+	connector	Classic PCB Header Strips, 0.100" pitch
TNL22ERT-62	ABB	2016+	Contactors	4P St Contactor Relay 77-143Vdc \|Abb TNL22ERT-62
62EM1-00001	Microchip	2023+	Development board	AgileSwitch® 62mm Electrical Master SiC Gate Driver Board

TI brand product recommendation

Model	Manufacturers	lot number	encapsulation	illustrate
TPS54320	TI	10+	14-VQFN	4.5V to 17V Input, 3A Synchronous Buck Converter
INA209	TI	08+	16TSSOP	High-side measurement, bidirectional current/power monitor with I2C interface
TPS54319	TI	2010+	QFN16	2.95V to 6V input, 3A synchronous buck converter
INA208	TI	10+	10MSOP, 14SOIC, 14TSSOP	High-side parallel monitor for measuring current with dual comparators
TPS54318	TI	10+	QFN-16	2.95V to 6V input, 3A synchronous buck converter
INA207	TI	10+	10MSOP, 14SOIC, 14TSSOP	High-side parallel monitor for measuring current with dual comparators
TPS54317	TI	2010+	QFN-24	3V to 6V, 3A synchronous buck converter
TPS54316-Q1	TI	10+	HTSSOP20	3V to 6V input, 3A synchronous buck converter with 3.3V output voltage
TPS54316-EP	TI	10+	HTSSOP20	3V to 6V input, 3A synchronous buck converter with 3.3V output voltage
TPS54316	TI	10+	HTSSOP20	3V to 6V input, 3A synchronous buck converter with 3.3V output voltage
INA206	TI	09+	10MSOP, 14SOIC, 14TSSOP	High-side parallel monitor for measuring current with dual comparators
INA205	TI	08+	10MSOP, 14SOIC, 14TSSOP	Unidirectional measurement current parallel monitor with dual comparators
TPS54315-Q1	TI	10+	20HTSSOP	Synchronous step-down Pwm transfer switch with enhanced 3V to 6V input and 3A output with integrated Fet
TPS54315-EP	TI	10+	20HTSSOP	Synchronous step-down Pwm transfer switch with enhanced 3V to 6V input and 3A output with integrated Fet
TPS54315	TI	10+	HTSSOP20	3V to 6V input, 3A synchronous buck converter with 2.5V output voltage
INA204	TI	09+	10MSOP, 14SOIC, 14TSSOP	Unidirectional measurement current parallel monitor with dual comparators
TPS54314-EP	TI	10+	20HTSSOP	Synchronous step-down Pwm transfer switch with enhanced 3V to 6V input and 3A output with integrated Fet
TPS54314	TI	09+	TSSOP20	3V to 6V input, 3A synchronous buck converter with 1.8V output voltage
TPS54313-EP	TI	10+	20HTSSOP	Synchronous step-down Pwm transfer switch with enhanced 3V to 6V input and 3A output with integrated Fet
TPS54313	TI	10+	TSSOP	3V to 6V input, 3A synchronous buck converter with 1.5V output voltage