home page>Product Center> Current parallel monitor

Product images are for illustrative purposes only
Product details are welcome upon request

INA271-HT

Category:Current parallel monitor
Product Name:High temperature voltage output, high side measurement current, parallel monitor
Manufacturers:TI
Production Batch Number:10+
Encapsulation:0XCEPT, 8CFP
Stock Status:There is stock
Stock Quantity:5000
Minimum order quantity: 1
Details:

Product introduction

The INA271 is a voltage output current shunt monitor that recognizes that the common-mode voltage current shunt drops from -16 V to +80 V, independent of the supply voltage. The pins of the INA271 enable filtering at any time.

The INA271 is a 20V/V output voltage scale. The 130kHz bandwidth simplifies the use of current control loops.

The INA271 operates from a single +2.7 V to +18 V supply, drawing a maximum supply current of 1300 μA. This equipment is available in the extended operating range: -55°C with a temperature range of 210°C

characteristic

Wide common-mode range: -16 V to +80 V
Common-mode rejection ratio: 78 dB
Precision:
± 10mV offset (max.)
± 7.5% Gain Error (Max)
100μV/°C Offset Drift (Max)
Bandwidth: up to 130kHz
Transfer function: 20V audio/video
Quiescent Current: 1300μA Max
Power supply: +2.7 V to +18 V
Provision filtering
apply
- DTH drilling
- High temperature environment
apply
- Control baselines
- A package/test website
- A production website
- Available at extremes (-55°C/210°C).
  Temperature range^（1）
- Extend product life cycle
- Extend the product, change notifications
- Product traceability
- Texas Instruments products use high temperature and high temperature
  Optimized silicon (tool) with design and process solutions
  Enhanced performance to maximize extended temperature range.

parameter

	Serotonin of INA271
Gain (V/V).	20
Common Mode Input Range (min) (5)	-16 to 80
Maximum input offset (+/-)()(UV)	10000
Maximum input offset drift (+/-)((UV/Celsius)	100
CMRR (minimum) (decibels)	78
Small signal bandwidth (typical) (MHz)	0.13
and (min) (v)	2.7
and (maximum) (v)	18
Operating temperature range(°C)	-55〜210
Pins/Packets	8CFP

andINA271-HTRelated ICs are:

Model	Manufacturers	lot number	encapsulation	illustrate
ISO124	TI	10+	8PDIP 8SOIC	Precision lowest cost isolation amplifier
ISO122	TI	10+	8PDIP 8SOIC	Low cost precision isolation amplifier
ISO121	TI	10+	16CDIP	Low cost precision isolation amplifier
INA282	TI	10+	8SOIC	Wide common-mode range, bidirectional, high-accuracy current parallel monitor
INA271A-Q1	TI	10+	8SOIC	Automotive voltage-unidirectional output-measurement current parallel monitor
INA271	TI	10+	8SOIC	Voltage output, Unidrectional measurement current shunt monitor
INA270A-Q1	TI	10+	8SOIC	Automotive voltage-unidirectional output-measurement current parallel monitor
INA270	TI	07+	8SOIC	Download - PDF icon Voltage output, Unidrectional measurement current shunt monitor
INA220	TI	10+	10MSOP	Bidirectional current/power monitor with 12C interface
INA219	TI	08+	8SOIC, 8SOT-23	Zero-drift, bidirectional current/power monitor in a SOT23 package

Popular searches

Model	Manufacturers	lot number	encapsulation	illustrate
MIP30F00830-S1048	Amphenol Positronic	2023+	connector	MIP series connectors
C163C/110EV-R1	Schaltebao	2023+	Contactors	Contactors
F670-H4V-XUU	LEACH	2023+	Relays	F670-H4V-XUU+SHKE470-110-AD
F670-H4VP-XUXU	LEACH	2023+	Relays	F670-H4VP-XUXU+SFE670-1-1
AZ16-12ZI-B1-1747-M20	SCHMERSAL	2023+	switch	Safety switches
RX2025GE1	Surio	2023+	connector	Extract, Remove, and Insert Tools Contact extraction tool #16
5106.021.09.24	Surio	2023+	connector	Extract, remove, and insert tools Extract tool with pop-up
ABMPSE06T28M4SV0N	AB Connectors	2023+	connector	Plug with RFI Ground
ABMPSE06T36M2SV0N	AB Connectors	2023+	connector	Plug with RFI Ground
ABMP18T28M13SV0N	AB Connectors	2023+	connector	RAIL AND MILITARY LAND SYSTEMS
ABCIRHSE06JE1812SCNF80M32V0	AB Connectors	2023+	connector	Halogen Free Bayonet Lock Connector Series
TSW-101-06-LM-D	samtec	2023+	connector	Classic PCB Header Strips, 0.100" pitch
TNL22ERT-62	ABB	2016+	Contactors	4P St Contactor Relay 77-143Vdc \|Abb TNL22ERT-62
62EM1-00001	Microchip	2023+	Development board	AgileSwitch® 62mm Electrical Master SiC Gate Driver Board
E2E-X7D212-R2M	Omron	2023+	sensor	Standard Proximity Sensor
E2E-X7D212-R5M	Omron	2023+	sensor	Standard Proximity Sensor
E2E-X7D112-R5M	Omron	2023+	sensor	Standard Proximity Sensor
E2E-X7D112-R2M	Omron	2023+	sensor	Standard Proximity Sensor
E2E-X7D112-R	Omron	2023+	sensor	Standard Proximity Sensor
AF16ZB-30-10RT-23	ABB	2023+	Contactors	Contactor 48-130V50/60HZ-DC Contactor

TI brand product recommendation

Model	Manufacturers	lot number	encapsulation	illustrate
INA271	TI	10+	8SOIC	Voltage output, Unidrectional measurement current shunt monitor
INA270A-Q1	TI	10+	8SOIC	Automotive voltage-unidirectional output-measurement current parallel monitor
INA270	TI	07+	8SOIC	Download - PDF icon Voltage output, Unidrectional measurement current shunt monitor
INA220	TI	10+	10MSOP	Bidirectional current/power monitor with 12C interface
INA219	TI	08+	8SOIC, 8SOT-23	Zero-drift, bidirectional current/power monitor in a SOT23 package
INA216A4	TI	10+	4DSBGA	A small, low-power current-sense amplifier for high-side sensing
INA216A3	TI	10+	4DSBGA	A small, low-power current-sense amplifier for high-side sensing
INA216A2	TI	10+	4DSBGA	A small, low-power current-sense amplifier for high-side sensing
INA216A1	TI	10+	4DSBGA	A small, low-power current-sense amplifier for high-side sensing
INA214-Q1	TI	10+	6SC70	Automotive voltage output, high/low-side measurement, bidirectional zero-drift series
INA214	TI	10+	10UQFN, 6SC70	Voltage output, high/low-side measurement, bidirectional zero-drift series current parallel monitors
INA213A-Q1	TI	10+	6SC70	Automotive voltage output, high/low-side measurement, bidirectional zero-drift series current parallel monitors
INA213	TI	10+	10UQFN, 6SC70	Voltage output, high/low-side measurement, bidirectional zero-drift series current parallel monitors
TPS54426	TI	10+	14HTSSOP	4.5V to 18V input, 4A synchronous step-down SWIFT™ converter with light load power savings
TPS54425	TI	10+	TSSOP14	4.5V to 18V input, 4A synchronous step-down SWIFT™ converter with D-CAP2™ mode
TPS54418	TI	10+	QFN-16	A full-featured 6-volt, 4-amp, current-mode converter that synchronizes two integrated MOSFETs in one step
TPS54380-Q1	TI	10+	TSSOP20	3V to 6V Input 3A Synchronous Buck Converter for Sequencing
TPS54380	TI	10+	TSSOP20	3V to 6V Input 3A Synchronous Buck Converter for Sequencing
TPS54377	TI	09+	QFN24	The sucked 3V to 6V input, 3A synchronous buck converter is disabled during startup
TPS54373	TI	10+	TSSOP-20	The sucked 3V to 6V input, 3A synchronous buck converter is disabled during startup