home page>Product Center> Difference amplifier

Product images are for illustrative purposes only
Product details are welcome upon request

INA330

Category:Difference amplifier
Product Name:Thermistor signal amplifier for temperature control
Manufacturers:TI
Production Batch Number:09+
Encapsulation:10MSOP
Stock Status:There is stock
Stock Quantity:3000
Minimum order quantity: 1
Details:

Product introduction

The precision INA330 amplifier is designed for thermoelectric cooler (TEC) control in optical network applications.It is optimized for use at 10 km. 10 km. -Thermistor-based temperature controller.Different input resistors are provided for excitation to produce the INA330 proportional output voltage.It uses only one precision resistor plus a thermistor, thus providing an alternative to traditional bridge circuitry.This new topology does not require two precision resistors to maintain good accuracy on temperature control equipment.

An excitation voltage to a thermistor (RTHERM) and a precision resistor (letters) generate a current and a 12 I1 rating.The current conveyor circuit generates output current, I0 I1 class – 12 people, which is equivalent to flowing through an external gain-setting resistor.

characteristic

Read, for optimization accuracyThermistor applications
- Low bias overheating:
  °C temperature error 0.009 - 40°C to +,85°C
- Excellent long-term stability
- Very low 1/f noise to 10Hz: (0.01Hz)
  (can be real-time °C) equivalent to 0.0001
10mV wide output swing: on rails
Business scope: single + 2.7V supply to + 5.5V
MSOP-10 microPACKAGE:
Only one precision resistor is required
apply
- THERMISTOR-BASED TEMPERATURE CONTROLLERS FOR FIBER OPTIC NETWORKS
- High-precision TEC applications are
- Laser temperature control

parameter

	INA330

VS(Min)(V)	270
Vs(Max)(V)	5.5
Quiescent current (+/-)(current)(mA)	2.6
Operating temperature range(°C)	- 40 to 85
Pin/Pack	10MSOP

andINA330Related ICs are:

Model	Manufacturers	lot number	encapsulation	illustrate
INA139-Q1	TI	10+	8TSSOP	Automotive high-side parallel monitor for measuring current
INA139	TI	10+	5SOT-23	High-side measurement current parallel monitor, current output
INA138-Q1	TI	10+	8TSSOP	Automotive high-side measurement current parallel monitor, current output
INA138	TI	10+	5SOT-23	High-side measurement current parallel monitor, current output
LM234	ST	10+	SOP8	Three-terminal adjustable current source
INA2322	TI	09+10+	14TSSOP	Micropower single-supply CMOS instrumentation amplifier
1N457	FAIRCHILD	11+	DO-35	High conductivity and low leakage diodes
INA2321	TI	08+	14TSSOP	Micropower single-supply CMOS instrumentation amplifier
INA2143	TI	09+	14SOIC	High speed precision G = 10 or G = 0.1 difference amplifier
INA2141	TI	08+	16SOIC	Dual, low-power G = 10,100 instrumentation amplifiers

Popular searches

Model	Manufacturers	lot number	encapsulation	illustrate
PW70d(2x10432Ω/83°）	FSG	2023+	potentiometer	PW70D(2*1043Ω 1%/83°）（1700Z04-257.106)
PW70d	FSG	2023+	potentiometer	PW70D(2*1043Ω 1%/83°）（1700Z04-257.106)
S34ML16G202BHI000	Flip Electronics	2051+	63BGA	16 Gb, 3 V, 4-bit ECC, x8 I/O, SLC NAND Flash Memory for Embedded
FRCIR06RGG18-20S-F80-V0-M20-1.5F	ITTVEAM	2023+	connector	Connectors, Circular Connectors, Circular Plugs & Receptacles
CL1215-02P72ET-U2	Schaltbau	2023+	Contactors	CL1215/02 P 72ET-U2 1, 2 and 3 pole AC and DC NO contactors for voltages up to 1,500 V
CL1115-02P72ET-U2	Schaltbau	2023+	Contactors	1, 2 and 3 pole AC and DC NO contactors for voltages up to 1,500 V
D-U204N-KLGQ	Mors Smitt	2023+	Relays	No magnetic arc blow-out
D-U204N-KLCQ	Mors Smitt	2023+	Relays	No magnetic arc blow-out
MIP30F00830-S1048	Amphenol Positronic	2023+	connector	MIP series connectors
C163C/110EV-R1	Schaltebao	2023+	Contactors	Contactors
F670-H4V-XUU	LEACH	2023+	Relays	F670-H4V-XUU+SHKE470-110-AD
F670-H4VP-XUXU	LEACH	2023+	Relays	F670-H4VP-XUXU+SFE670-1-1
AZ16-12ZI-B1-1747-M20	SCHMERSAL	2023+	switch	Safety switches
RX2025GE1	Surio	2023+	connector	Extract, Remove, and Insert Tools Contact extraction tool #16
5106.021.09.24	Surio	2023+	connector	Extract, remove, and insert tools Extract tool with pop-up
ABMPSE06T28M4SV0N	AB Connectors	2023+	connector	Plug with RFI Ground
ABMPSE06T36M2SV0N	AB Connectors	2023+	connector	Plug with RFI Ground
ABMP18T28M13SV0N	AB Connectors	2023+	connector	RAIL AND MILITARY LAND SYSTEMS
ABCIRHSE06JE1812SCNF80M32V0	AB Connectors	2023+	connector	Halogen Free Bayonet Lock Connector Series
TSW-101-06-LM-D	samtec	2023+	connector	Classic PCB Header Strips, 0.100" pitch

TI brand product recommendation

Model	Manufacturers	lot number	encapsulation	illustrate
INA2322	TI	09+10+	14TSSOP	Micropower single-supply CMOS instrumentation amplifier
INA2321	TI	08+	14TSSOP	Micropower single-supply CMOS instrumentation amplifier
INA2143	TI	09+	14SOIC	High speed precision G = 10 or G = 0.1 difference amplifier
INA2141	TI	08+	16SOIC	Dual, low-power G = 10,100 instrumentation amplifiers
INA2137	TI	10+	14PDIP, 14SOIC	Audio differential line receiver, +-6dB (G=1/2 or 2)
INA2134	TI	09+	14PDIP, 14SOIC	Audio Differential Line Receiver, 0dB (G=1)
INA2133	TI	10+	14SOIC	High speed precision difference amplifier
INA2132	TI	10+	14SOIC	Dual, low-power, single-supply difference amplifiers
INA2128	TI	09+	16SOIC	Dual low-power instrumentation amplifiers
INA159-EP	TI	10+	8MSOP	Enhanced 0.2-stage precision gain difference amplifier
INA159	TI	10+	8MSOP	High speed 0.2-stage precision gain difference amplifier
INA157	TI	10+	8SOIC	High speed precision difference amplifier
INA154	TI	10+	8SOIC	High Speed Precision Difference Amplifier (G = 1)
INA152	TI	07+	8MSOP	Single-supply difference amplifier
INA146	TI	08+	8SOIC	High voltage programmable gain difference amplifier
INA145	TI	09+	8SOIC	Programmable gain difference amplifier
INA143	TI	10+	8SOIC	High speed precision G = 10 or G = 0.1 difference amplifier
INA137	TI	10+	8PDIP, 8SOIC	Audio differential line receiver, +-6dB (G=1/2 or 2)
INA134	TI	10+	8PDIP, 8SOIC	Audio Differential Line Receiver, 0dB (G=1)
INA133	TI	10+	8SOIC	High speed precision difference amplifier