home page>Product Center> Single power supply
INA331
Product images are for illustrative purposes only
Product details are welcome upon request

INA331

  • Category:Single power supply
  • Product Name:Low power single-supply CMOS instrumentation amplifier
  • Manufacturers:TI
  • Production Batch Number:10+
  • Encapsulation:8MSOP
  • Stock Status:There is stock
  • Stock Quantity:5000
  • Minimum order quantity: 1
  • Details:Click here to find the PDF information for INA331
  • Click Request a quote
Contact usOnline customer service1 Online customer service2 Click Send email
  • Product introduction

This is the INA331 INA2331 rail-to-rail output and CMOS instrumentation amplifier with low power consumption, offering range, single-supply operation, and bipolar-supply operation.The home offers a low-cost INA331, low-noise amplified differential signal at a lower current (415μA drops to 0.01μA off at rest).Back to normal running in microseconds, this cannot be used for battery or multi-channel applications.

With the addition of 5V/V to the configuration internally, the INA331 provides flexibility in higher yields by selecting external resistors.

This INA331 rejects line noise and its harmonic common-mode error to keep low levels even at higher frequencies.

The high bandwidth ideal also kills the rate that makes the INA331 directly drive sampling analog-to-digital converters (A/D) as well as general-purpose applications.

characteristic
  • Designed for low cost
  • Accuracy: High gain, G = 5°C / 0.02%, 2ppm
  • Gain and extension.Resistance> 5V/V)
  • Low Offset Voltage ±2.5μV:
  • Thus 94dB high DC, 50dB: at 45kHz
  • Low bias current of 0.5pA.
  • 2.0MHz bandwidth, kill rate, 5V/μs:
  • Rail-to-rail output swing: (V+) - 0.02V
  • Wide temperature range: -55°C to +125°C
  • Current: 490μA low static max/zen
  • μA off: 0.01
  • MSOP-8 single, TSSOP-14 double pack
  • apply
    • Industrial Sensor Amplifiers:
        bridge, thermocouple, position,
    • Physiological amplifiers:
        ECG, EEG, EMG
    • A/D converters for signal processing
    • Differential line receiver with harvest
    • Utility meter field
    • PCMCIA card
    • Audio amplifier
parameter
    INA331
Thus (Min)(dB)   90
Count it   1
Pin/Pack   8MSOP
Input bias (+/-)(max) (uV)   500
Input bias drift (+/-) (max) (uV/Celsius)   5
Input bias current (+/-) (max.) (South)   0.01
Hertz (flow noise) (Viditch/RT (Hz))   46
Quiescent current (+/-)(current)(mA)   0.415
Settling time 0.01% (stream) (US)   2.5
Gain (V/V)   5 to 1000
Input type   CMOS
Nonlinearity (+/-)(max)(%)   0.1
Bandwidth in G = 100(min) (khertz)   In 2000
Operating temperature range(°C)   -55 to 125
Pair (Min)(V)   2.5
Pair (Max) (V)   5.5

andINA331Related ICs are:


Model Manufacturers lot number encapsulation illustrate
INA337 TI 10+ 8MSOP Wide temperature range precision instrumentation amplifier
INA333-HT TI 10+ 0XCEPT, 8CDIP SB, 8CFP High temperature and low power consumption precision instrumentation amplifier
INA333 TI 10+ 8MSOP, 8SON Low power precision instrumentation amplifier
TPS54291 TI 10+ HTSSOP-16 4.5V to 18V input, 1.5/2.5A, 600kHz dual output synchronous buck converter
INA332 TI 10+ 8MSOP Low power, single supply, CMOS, low cost instrumentation amplifier
INA327 TI   10MSOP Precision low drift CMOS instrumentation amplifier with shutdown state
INA326 TI 08+ 8MSOP Precision low drift CMOS instrument amplifier
TPS54290 TI 10+ HTSSOP 4.5V to 18V input, 1.5/2.5A, 300kHz dual output synchronous buck converter
INA322 TI 09+ 8MSOP Micropower single-supply CMOS instrumentation amplifier
uPA2733GR NEC 11+ SOP-8 SWITCHING P-CHANNEL POWER MOSFET

Popular searches


Model Manufacturers lot number encapsulation illustrate
PW70d(2x10432Ω/83°) FSG 2023+ potentiometer PW70D(2*1043Ω 1%/83°)(1700Z04-257.106)
PW70d FSG 2023+ potentiometer PW70D(2*1043Ω 1%/83°)(1700Z04-257.106)
S34ML16G202BHI000 Flip Electronics 2051+ 63BGA 16 Gb, 3 V, 4-bit ECC, x8 I/O, SLC NAND Flash Memory for Embedded
FRCIR06RGG18-20S-F80-V0-M20-1.5F ITTVEAM 2023+ connector Connectors, Circular Connectors, Circular Plugs & Receptacles
CL1215-02P72ET-U2 Schaltbau 2023+ Contactors CL1215/02 P 72ET-U2 1, 2 and 3 pole AC and DC NO contactors for voltages up to 1,500 V
CL1115-02P72ET-U2 Schaltbau 2023+ Contactors 1, 2 and 3 pole AC and DC NO contactors for voltages up to 1,500 V
D-U204N-KLGQ Mors Smitt 2023+ Relays No magnetic arc blow-out
D-U204N-KLCQ Mors Smitt 2023+ Relays No magnetic arc blow-out
MIP30F00830-S1048 Amphenol Positronic 2023+ connector MIP series connectors
C163C/110EV-R1 Schaltebao 2023+ Contactors Contactors
F670-H4V-XUU LEACH 2023+ Relays F670-H4V-XUU+SHKE470-110-AD
F670-H4VP-XUXU LEACH 2023+ Relays F670-H4VP-XUXU+SFE670-1-1
AZ16-12ZI-B1-1747-M20 SCHMERSAL 2023+ switch Safety switches
RX2025GE1 Surio 2023+ connector Extract, Remove, and Insert Tools Contact extraction tool #16
5106.021.09.24 Surio 2023+ connector Extract, remove, and insert tools Extract tool with pop-up
ABMPSE06T28M4SV0N AB Connectors 2023+ connector Plug with RFI Ground
ABMPSE06T36M2SV0N AB Connectors 2023+ connector Plug with RFI Ground
ABMP18T28M13SV0N AB Connectors 2023+ connector RAIL AND MILITARY LAND SYSTEMS
ABCIRHSE06JE1812SCNF80M32V0 AB Connectors 2023+ connector Halogen Free Bayonet Lock Connector Series
TSW-101-06-LM-D samtec 2023+ connector Classic PCB Header Strips, 0.100" pitch

TI brand product recommendation


Model Manufacturers lot number encapsulation illustrate
INA327 TI   10MSOP Precision low drift CMOS instrumentation amplifier with shutdown state
INA326 TI 08+ 8MSOP Precision low drift CMOS instrument amplifier
TPS54290 TI 10+ HTSSOP 4.5V to 18V input, 1.5/2.5A, 300kHz dual output synchronous buck converter
INA322 TI 09+ 8MSOP Micropower single-supply CMOS instrumentation amplifier
INA321 TI 09+ 8MSOP Micropower single-supply CMOS instrumentation amplifier
INA2332 TI 09+ 14TSSOP Low power single-supply CMOS instrumentation amplifier
INA2331 TI 10+ 14TSSOP Low power single-supply CMOS instrumentation amplifier
TPS54283 TI 2010+ TSSOP14 2A DUAL NON-SYNCHRONOUS CONVERTER
TPS54262-Q1 TI 10+ 20HTSSOP Automotive 2A, 60V step-down DC/DC converter with low IQ, voltage monitoring, and reset
INA217 TI 10+ 16SOIC, 8PDIP A low-noise, low-distortion instrumentation amplifier to replace the SSM2017
INA163 TI 10+ 14SOIC Low noise and low distortion instrumentation amplifier
INA156 TI 09+10+ 8MSOP Single-supply, rail-to-rail output CMOS instrumentation amplifier
TPS54260 TI 10+ MSOP-10 3.5V to 60V input, 2.5A buck converter with Eco-Mode
TPS54240 TI 10+ MSOP-10 3.5V to 42V input, 2.5A buck converter with Eco-Mode
TPS54233 TI 2011+ SOIC-8 3.5V to 28V input, 2A, 1MHz buck converter with Eco-mode
INA155 TI 10+ 8MSOP, 8SOIC Single-supply, rail-to-rail output, CMOS instrumentation amplifier
INA125 TI 08+ 16PDIP, 16SOIC Instrumentation amplifier with precision voltage reference
INA122 TI 10+ 8PDIP, 8SOIC Single-supply micropower instrumentation amplifier
TPS54232 TI 1001+ SOP8 3.5V to 28V input, 2A, 300kHz buck converter with Eco-mode
TPS54228 TI 10+ SOP 4.5V to 18V input to 2A synchronous step-down SWIFT converter with light load efficiency

Categorical search