Key features:
Pin Electronic Drivers/Comparisons
Stage 3 Drivers (, DVH/DVL Combo/VTT)
8V driver output swing
High impedance over the 16V range Very low leakage
Differential drive and comparator mode
16V comparator input standard range
load
24 mAh IMAX
16V input qualification range
High impedance over the 16V range Very low leakage
Independent power-down option
Rectification
Propagation delay adjustment
Drop edge adjustment
PMU
Fair Value, FI'S MV, MI
FI voltage clamping
Eight (32 mA, 8 mA, 2 mA, 512μA, 128μA, 32μA, 8μA, 2μA current range)
Resistive load (8 selectable resistance values)
Remote sensing options
On-chip DC level
13 Levels/Channels
Gain and offset correction/grading
Ground remote sensing and correction of DUT
Flexible, high-speed digital inputs and outputs
For the input of optional on-chip terminals
Read back the internal state
Package/Power Consumption
A 64-pin, 10mm x 10mm TQFP package with an exposed heatsink on top
64-pin, 9mmx9mm QFN package with an exposed heatsink on top
PDQ≤ 500mW/Channel @ 11V operation
description
The ISL55161 is a highly integrated system-on-chip (SOC) pin-electronic solution designed to incorporate every analog function, along with some digitally enabled features, on a per-channel basis to automatically test the device required. The interface, the I/O of the control chip are all analog circuits within the digital chip. Two full test channels are integrated into each ISL55161,
ISL55161 is pin and function compatible with Venus4.