LC1-D1801M7N

• Product Introduction

LC1-D1801M7N

1. Scope of application   LC1D series AC contactor (hereinafter referred to as contactor) is suitable for AC 50Hz or 60Hz, voltage to 660V, current to 95A circuit, for long-distance connection and disconnection of circuits, frequent starting, control of AC motors, contactors can also be assembled into building block auxiliary contact groups, air delay heads, mechanical interlock mechanisms and other accessories, forming delay contactors, reversible contactors, star triangle starters, etc., And can comply with IEC60947-4-1 and GB14048.4 standards with appropriate products.

2. Model and its meaning  

3. Normal working conditions and installation conditions //www.chip100.com/ 3.1 The ambient air temperature is: -5°C~+40°C. Its average value does not exceed +35°C within 24 hours; 3.2 Altitude: no more than 2000m; 3.3 Atmospheric conditions: air relative humidity does not exceed 50% at +40°C, higher relative humidity can be at lower temperatures, the average monthly minimum temperature in the wettest month does not exceed +25°C, and the monthly average maximum relative humidity in that month does not exceed 90%, and condensation on the product due to temperature changes is considered. 3.4 Pollution level: level 3; 3.5 Installation category: Class III; 3.6 Installation conditions: The inclination of the installation surface and the vertical surface is not more than ±5°; 3.7 Shock and vibration: The product should be installed and used in a place where there is no significant shaking, shock and vibration.

4. Main parameters and technical performance 4.1 The contactor can be assembled with any of the accessories in Table 1 and Table 2 Auxiliary contact group Table 1