|
Brief introduction: LQ/LE series products can be combined with a variety of different test objects, such as fan blades, various engine nozzles, etc. These sensors are characterized by their small size, high natural frequency, vibration and shock resistance, and wide temperature range. ●Ideal wind tunnel application products; ●Wide temperature range -55°C to 235°C; ●Superior dynamic and static characteristics; ● High natural frequency LQ-062 Series LE-062 Series ● Ideal for wind tunnel applications ● Wide temperature range from -55°C to 235°C ● Superior dynamic and static characteristics ● High natural frequency LQ/LESeries proofKuliteAbility to provide customized products. This series of products can be combined with a variety of different test objects, such as fan blades, various engine nozzles, etc. These sensors are characterized by their small size, high natural frequency, vibration and shock resistance, and wide temperature range.
| lose enter | Pressure range | | 1.7 | 3.5 | 7 | 17 | 35 | 70 Bar |
| 25 | 50 | 100 | 250 | 500 | 1000 Psi |
| Working mode | Absolute, gauge, sealed gauge, differential pressure | Absolute, sealed gauge |
| Overload pressure | 2 times the rated pressure, no change in calibration value |
| Rupture pressure | 3 times the rated pressure |
| Pressure medium | All non-conductive, non-corrosive liquids and gases |
| Rated excitation voltage | 10VDC/AC |
| Maximum excitation voltage | 15VDC/AC |
| Input impedance | 1000Ω (min) |
| lose go out | Output impedance | 1000Ω (nominal) |
| Full-scale output (FSO) | 100mV (nominal) |
| Zero imbalance | ±5mV (typical) |
| synthesis Nonlinearity, hysteresis, repeatability | ±0.1%FS BFSL (typical) |
| Resolution | Infinitesimal |
| Natural frequency (kHz) (typical) | 400 | 500 | 650 | 900 | 1300 | 1600 |
| Acceleration sensitivity %FS/g | vertical | 3.0 x10-4 | 1.5 x10-4 | 1.0 x10-4 | 5.0 x10-5 | 3.0 x10-5 | 2.0 x10-5 |
| Transverse | 6.0 x10-5 | 3.0 x10-5 | 2.0 x10-5 | 1.0 x10-5 | 6.0 x10-6 | 4.0 x10-6 |
| Insulation resistance | ≥100MΩ at 50VDC |
| Environmental conditions | Operating temperature range | LQ Series: -55°C to 120°C (-65°F to 250°F) LE Series: -55°C to 235°C (-65°F to 450°F) |
| Compensate for temperature range | LQ Series: 25°C to 80°C (80°F to 180°F), any 100°F range can be required within the operating range LE Series 25°C to 235°C (80°F to 450°F) |
| Hot zero point drift | ±1% FS /100°F (typical) |
| Thermally sensitive drift | ±1% FS /100°F (typical) |
| Steady-state acceleration | 10000g maximum |
| Linear vibration | 10-2000Hz sine wave, 100g max |
| Physical properties | Electrical connection | 4 x 38AWG wires, 30 inches long |
| weight | 0.2g (nominal), excluding components and connecting wires |
| Sensitivity principle | Wheatstone bridge dielectric insulated silicon stacked silicon leadless technology |
|