| lose enter | Pressure range | | LQ/LE | LL/LLHT/LQ/LE |
| 0.7 | 1.7 | 3.5 | 7 | 17 | 35 Bar |
| 10 | 25 | 50 | 100 | 250 | 500 Psi |
| Working mode | Absolute, gauge, sealed gauge, differential pressure |
| Overload pressure | 2 times the rated pressure, no change in calibration value |
| Rupture pressure | 3 times the rated pressure |
| Pressure medium | All non-conductive, non-corrosive liquids and gases (LQ/LE) All with SiO215-5PH stainless steel compatible media (LL/LLHT) |
| Rated excitation voltage | 10VDC/AC |
| Maximum excitation voltage | 15VDC/AC |
| Input impedance | 1000Ω (min) |
| lose go out | Output impedance | 1000Ω (nominal) |
| Full-scale output (FSO) | 100mV (nominal) |
| Zero imbalance | ±5mV (typical) |
|
综合 Nonlinearity, hysteresis, repeatability | ±0.1%FS BFSL (typical) |
| Resolution | Infinitesimal |
| Natural frequency (kHz) (typical) | 300 | 400 | 500 | 600 | 750 | 1000 |
| Acceleration sensitivity %FS/g | vertical | 7.0 x10-4
| 3.0 x10-4
| 1.5 x10-4
| 1.0 x10-4
| 5.0 x10-5
| 3.0 x10-5
|
| Transverse | 1.4 x10-4
| 6.0 x10-5
| 3.0 x10-5
| 2.0 x10-5
| 1.0 x10-5
| 6.0 x10-6
|
| Insulation resistance | ≥100MΩ (在50VDC时) |
| Environmental conditions | Operating temperature range | LQ/LL Series: -55°C to 120°C (-65°F to 250°F) LE/LLHT Series: -55°C to 235°C (-65°F to 450°F) |
| Compensate for temperature range | LQ/LL系列：25℃到80℃(80℉到180℉)，可以要求在工作范围内的任何100℉的范围 LE/LLHT Series: 25°C to 235°C (80°F to 450°F) |
| Hot zero point drift | ±1% FS /100°F (typical) |
| Thermally sensitive drift | ±1% FS /100°F (typical) |
| Steady-state acceleration | 30 000g maximum |
| Linear vibration | 10-2000Hz sine wave, 100g max |
| Physical properties | Electrical connection | 4根32AWG扁平导线，长36英寸(LE/LLHT系列36AWG导线) |
| weight | 0.2g (nominal), excluding components and connecting wires |
| Sensitivity principle | Wheatstone bridge dielectric insulated silicon stacked silicon (LL/LLHT series leadless technology) |