lose
enter |
Pressure range |
|
LQ/LE |
LL/LLHT/LQ/LE |
0.7 |
1.7 |
3.5 |
7 |
17 |
35 Bar |
10 |
25 |
50 |
100 |
250 |
500 Psi |
Working mode |
Absolute pressure, gauge pressure, sealing gauge pressure, differential pressure |
Overload pressure |
2 times the rated pressure, no change in calibration value |
Rupture pressure |
3 times the rated pressure |
pressure medium |
All non-conductive, non-corrosive liquids and gases (LQ/LE)
All media compatible with SiO2 and 15-5PH stainless steel (LL/LLHT) |
Rated excitation voltage |
5VDC/AC |
Maximum excitation voltage |
7.5VDC/AC |
Input impedance |
1000Ω (min) |
lose
go out |
Output impedance |
1000Ω (Rating) |
Full Scale Output (FSO) |
100mV (Rating) |
Zero bit imbalance |
±5mV (typical) |
synthesis
Nonlinear, hysteresis, and repetitive |
±0.1% FS BFSL (typical) |
Discrimination |
Infinitely small |
Natural Frequency (kHz) (Typical) |
300 |
400 |
500 |
600 |
750 |
1000 |
Acceleration sensitivity
%FS/g |
vertical |
7.0 x10 -4 |
3.0 x10 -4 |
1.5 x10 -4 |
1.0 x10 -4 |
5.0 x10 -5 |
3.0 x10 -5 |
Transverse |
1.4 x10 -4 |
6.0 x10 -5 |
3.0 x10 -5 |
2.0 x10 -5 |
1.0 x10 -5 |
6.0 x10 -6 |
Insulation resistance |
≥100MΩ (at 50VDC) |
environmental conditions |
Operating temperature range |
LQ/LL Series: -55°C to 120°C (-65°F to 250°F)
LE/LLHT Series: -55°C to 235°C (-65°F to 450°F) |
Compensate for the temperature range |
LQ/LL Series: 25°C to 80°C (80°F to 180°F), can request any 100°F range in the operating range
LE/LLHT Series: 25°C to 235°C (80°F to 450°F) |
Hot zero drift |
±1% FS /100°F (typical) |
Thermal sensitive drift |
±1% FS /100°F (typical) |
steady-state acceleration |
30 000g max |
Linear vibration |
10-2000Hz sine wave, 100g max |
Physical properties |
Electrical connections |
4 x 32AWG wires, 36" long (LE/LLHT series 36AWG flat wires) |
weight |
0.2g (rating), excluding components and connecting wires |
Sensitive principle |
Wheatstone Bridge Dielectric Insulating Silicon Laminated (LL/LLHT Series Leadless Technology) |