Product images are for illustrative purposes only
Product details are welcome upon request

LM111

Category:Comparator
Product Name:Differential comparator with select signal
Manufacturers:TI
Production Batch Number:09+
Encapsulation:20LCCC, 8CDIP
Stock Status:There is stock
Stock Quantity:5000
Minimum order quantity: 1
Details:

Product introduction

The LM111, LM211, LM311 are single and high speed voltage comparators. These devices are designed to operate from a wide range of supply voltages, including ± 15 V op amps and 5 V logic system consumables. The output level is compatible with most TTL and MOS circuits. These comparators or relays drive lamps and switch voltages from 50 mA to 50 V. All inputs and outputs can be systematically isolated. These outputs can drive a ground load reference, or V_targetV CC_{+ CC-.} In case of balance and strobe dysfunction, and the output can be wired or connected. If it is low strobe, the output is off, regardless of the differential input.

characteristic

Fast response time
Strobe capability
Maximum input bias current. 。。 300 nA
Maximum input bias current. 。。 70 nA
Operates from a single-phase 5 V supply
In Q - Temperature available car
- High reliability for automotive applications
- Configuration control/printing support
- Automotive standard qualification

parameter

	LM111
Number of channels	One
IQ per channel (max.) (mA)	6
Output Current (min) (mA)	50
tRESP Low - To - High (US)	0.165
Output type	Open collector, emitter
VIO (25 degrees Celsius) (max) (millivolts)	Three
Pins/Packets	20LCCC，8CDIP
VICR (min) (Fri)	-14.7
VICR (max.) (5)	13.8
and (min) (v)	3.5
and (maximum) (v)	30
Operating temperature range(°C)	-55 to 125

andLM111Related ICs are:

Model	Manufacturers	lot number	encapsulation	illustrate
LM211-Q1	TI	10+	8SOIC	Automotive differential comparator with select signal
LM211-EP	TI	10+	8SOIC	Enhanced product differential comparator with select signal
LM193	TI	09+	20LCCC, 8CDIP, 8SOIC	Dual differential comparator
LM139A	TI	10+	14CDIP, 14CFP, 14SOIC, 20LCCC	Four-way differential comparator
LM139-SP
THS4226	TI	10+	10MSOP-PowerPAD	Low distortion high-speed rail-to-rail output with off-off state
OPA832	TI	10+	5SOT-23, 8SOIC	Low power single-supply fixed-gain video buffer amplifier
OPA3832	TI	10+	14SOIC, 14TSSOP	Three, low-power, high-speed, fixed-gain op amps
OPA2832	TI	07+	8MSOP, 8SOIC	Dual low power, high speed, fixed gain operational amplifiers
OPA659	TI	09+	5SOT-23, 8SON	650MHz unity-gain stable JFET input amplifier

Popular searches

Model	Manufacturers	lot number	encapsulation	illustrate
S34ML16G202BHI000	Flip Electronics	2051+	63BGA	16 Gb, 3 V, 4-bit ECC, x8 I/O, SLC NAND Flash Memory for Embedded
FRCIR06RGG18-20S-F80-V0-M20-1.5F	ITTVEAM	2023+	connector	Connectors, Circular Connectors, Circular Plugs & Receptacles
CL1215-02P72ET-U2	Schaltbau	2023+	Contactors	CL1215/02 P 72ET-U2 1, 2 and 3 pole AC and DC NO contactors for voltages up to 1,500 V
CL1115-02P72ET-U2	Schaltbau	2023+	Contactors	1, 2 and 3 pole AC and DC NO contactors for voltages up to 1,500 V
D-U204N-KLGQ	Mors Smitt	2023+	Relays	No magnetic arc blow-out
D-U204N-KLCQ	Mors Smitt	2023+	Relays	No magnetic arc blow-out
MIP30F00830-S1048	Amphenol Positronic	2023+	connector	MIP series connectors
C163C/110EV-R1	Schaltebao	2023+	Contactors	Contactors
F670-H4V-XUU	LEACH	2023+	Relays	F670-H4V-XUU+SHKE470-110-AD
F670-H4VP-XUXU	LEACH	2023+	Relays	F670-H4VP-XUXU+SFE670-1-1
AZ16-12ZI-B1-1747-M20	SCHMERSAL	2023+	switch	Safety switches
RX2025GE1	Surio	2023+	connector	Extract, Remove, and Insert Tools Contact extraction tool #16
5106.021.09.24	Surio	2023+	connector	Extract, remove, and insert tools Extract tool with pop-up
ABMPSE06T28M4SV0N	AB Connectors	2023+	connector	Plug with RFI Ground
ABMPSE06T36M2SV0N	AB Connectors	2023+	connector	Plug with RFI Ground
ABMP18T28M13SV0N	AB Connectors	2023+	connector	RAIL AND MILITARY LAND SYSTEMS
ABCIRHSE06JE1812SCNF80M32V0	AB Connectors	2023+	connector	Halogen Free Bayonet Lock Connector Series
TSW-101-06-LM-D	samtec	2023+	connector	Classic PCB Header Strips, 0.100" pitch
TNL22ERT-62	ABB	2016+	Contactors	4P St Contactor Relay 77-143Vdc \|Abb TNL22ERT-62
62EM1-00001	Microchip	2023+	Development board	AgileSwitch® 62mm Electrical Master SiC Gate Driver Board

TI brand product recommendation

Model	Manufacturers	lot number	encapsulation	illustrate
THS4226	TI	10+	10MSOP-PowerPAD	Low distortion high-speed rail-to-rail output with off-off state
OPA832	TI	10+	5SOT-23, 8SOIC	Low power single-supply fixed-gain video buffer amplifier
OPA3832	TI	10+	14SOIC, 14TSSOP	Three, low-power, high-speed, fixed-gain op amps
OPA2832	TI	07+	8MSOP, 8SOIC	Dual low power, high speed, fixed gain operational amplifiers
OPA659	TI	09+	5SOT-23, 8SON	650MHz unity-gain stable JFET input amplifier
OPA653	TI	09+	5SOT-23, 8SON	Download - PDF icon Wideband, fixed gain, JFET input amplifier
OPA4354	TI	09+	14SOIC, 14TSSOP	250MHz rail-to-rail I/O CMOS quad operational amplifier
OPA361	TI	08+	6SC70	3V video amplifier with internal gain and filter
OPA360	TI	07+	6SC70	3V video amplifier with low-pass filter, internal G=2, and SAG correction in SC70 package
OPA358	TI	10+	6SC70	3V single-supply 80MHz high speed operational amplifier in SC70 package
OPA357	TI	08+	6SOT-23, 8SO PowerPAD	250MHz rail-to-rail I/O single CMOS op amp with off-state
OPA356-Q1	TI	10+	5SOT-23	Automotive 2.5V, 200MHz GBW, CMOS single op amp
OPA356	TI	09+	5SOT-23, 8SOIC	2.5V 200MHz GBW CMOS single op amp
OPA354A-Q1	TI	10+	5SOT-23	250 MHz, rail-to-rail I/O, CMOS op amp
OPA354	TI	10+	5SOT-23, 8SO PowerPAD	250MHz rail-to-rail I/O CMOS single op amp
OPA3355	TI	10+	14SOIC, 14TSSOP	GBW CMOS triple op amp with 2.5V 200MHz in shutdown state
OPA2357	TI	10+	10MSOP	250MHz rail-to-rail I/O dual CMOS operational amplifier with off-state
OPA2356	TI	10+	8MSOP, 8SOIC	2.5V 200MHz GBW CMOS dual operational amplifier
OPA2355	TI	10+	10MSOP	2.5V 200MHz GBW CMOS dual op amp with shutdown state
OPA2354A-Q1	TI	10+	8MSOP	Automotive 250MHz rail-to-rail I/O CMOS dual operational amplifiers