LM25061PMME-1

• Product Introduction

peculiarity

Operating range: 2.9 V to 17 V Inrush current limits for safety board insertion into the field power supply Maximum power consumption for programmable external devices Adjustable current limit Circuit breaker function serious overcurrent events The internal high-voltage side charge pump is driven by an external N-channel MOSFET gate Adjustable undervoltage lockout (UVLO) and hysteresis Adjustable output voltage monitoring and hysteresis The initial insertion timer allows the ringing and the connection of the system after the transient subsides Programmable fault timer to avoid nuisance The high-level drain open-circuit power output is good Available in locking faults and auto-reboot versions

illustrate

LM25061 actively hot-swappable controller provides intelligent control of the supply voltage from a live system backplane or other "hot" power source load in inserting and removing the circuit card. LM25061 provides inrush current control to limit system voltage drops and transients. The programmable current limit and the power consumption of the external series of pass-through N-channel MOSFETs ensure safe operating area (SOA) operation. The power supply normal output indicates when the output voltage exceeds a programmable threshold. The level and hysteresis at the input voltage are programmable, as well as the initial insertion delay time and fault detection time. After the LM25061-1 latch, the fault is detected, while the LM25061-2 automatically restarts at a fixed duty cycle. LM25061 is in a 10-pin MSOP package.

apply

Server backplane system Base station power distribution system Solid state circuit breaker