LM25574MTX

• LM5575Q is automotive-grade and AEC-Q100 qualified Level 1 (-40°C to +125°C operating junction temperature)
• Integrated 75V, 330mΩN channel MOSFETs
• Ultra-wide input voltage range of 6V to 75V
• The adjustable output voltage is 1.225V
• 1.5% feedback reference accuracy
• The operating frequency of a single resistor is adjustable from 50kHz to 500kHz
• Master or slave frequency synchronization
• Adjustable soft start
• Analog current-mode control architecture
• Wide bandwidth error amplifier
• Built-in protection
• This is an AEC - Q100 standard Class 0 qualified automotive grade product data sheet is available upon request.

• (Operating junction temperature range from -40°C to +150°C)

illustrate

The LM5575 is an easy-to-use SIMPLE SWITCHER ® buck regulator that enables design engineers to design and optimize a reliable power supply with minimal components. Operating from an input voltage range of 6 - 75V, the LM5575 provides a continuous output current of 1.5A with an integrated 330mΩN channel MOSFET. The regulator uses an analog current-mode architecture to provide the low duty cycle of a no-current-mode regulator that typically limits inherent line gauge, tight load transient response, and easy loop compensation. The operating frequency is adjustable, from 50kHz to 500kHz, allowing for optimization of scale and efficiency. To reduce electromagnetic interference, the frequency synchronization pin allows automatic synchronization from multiple ICs in the LM(2)557x family, or to an external clock. The LM5575 guarantees robustness with cycle-by-cycle current limiting, short-circuit protection, thermal shutdown, and remote shutdown. Available in an enhanced TSSOP-16 package with an exposed chip-bonded thermal pad in the power device. The LM5575 is a full suite of WEBENCH online design tools support.

apply

• Car
• industry