- Up to 96% conversion efficiency
- Available in SO-8 packages, 8-pin DIP and LLP packages
-
Computer design software The LM267X makes it simple (Version 6.0)
- Simple and easy to use design with
- Only 5 external components are required
- Use off-the-shelf standard inductors
- 3.3V, 5.0V, 12V and adjustable output versions
- Adjustable version output voltage range from 1.21V to 37V
- ± 1.5% maximum output exceeds line voltage tolerance and load conditions
- 500mA output load current is guaranteed
- 0.25Ω DMOS output switch
- Wide 8V to 40V Input Voltage Range:
- Internal oscillator at fixed frequency at 260 kHz
- TTL shutdown capability, low-power standby mode
- Thermal shutdown and current limit protection
illustrate
The LM2674 series of regulators are monolithic integrated circuits with an LMDMOS process built in. These regulators provide all buck (buck) switching regulators with excellent line and load regulation at 500 mA with positive function of load current. These devices are available in fixed output voltages of 3.3V, 5.0V, 12V, adjustable output versions.
Requiring a minimum number of external components, these regulators are simple to use, including patented internal frequency compensation (patent 5382918 and 5514947) and fixed frequency oscillators.
The LM2674 series switches at a frequency operation 260 kHz This allows for a small size ratio with the lower frequency switching regulator required for the filter assembly. Due to its very high efficiency (> 90%), copper traces of the printed circuit board are the only heat dissipation required.
A home use LM2674 standard inductor is available from several different manufacturers. This feature greatly simplifies the design of switching power supplies using these advanced integrated circuit supplies. Also included in the datasheet is a guide to selecting diodes and capacitors designed to operate in switch-mode power supplies.
Other features include a guaranteed tolerance of 1.5% of the output voltage specified in the ± and output load conditions for the input voltage and output load conditions, and a ± 10% of the oscillator frequency. External shutdown with a typical standby current of 50μA. The output switch includes current limit, thermal shutdown, and full protection during fault conditions.
To simplify the design process of the LM2674 buck regulator, computer design software exists, The LM267X makes it simple (Version 6.0).
|