- 1.6V low operating voltage
- Low quiescent current
- Locking function: The device can latch too high temperature
- Push-pull and open-drain temperature switch outputs
- Wide spot range travel from 0°C to 150°C
- A temperature sensor output that very linearly simulates V temperature
- V Temperature output short circuit protection
- Accurate -50°C to 150°C temperature range
- 2.2 mm × 2.5 mm (typical) LLP-6 package
- Excellent power supply noise suppression
-
The LM26LVQISD-130 is not only AEC-Q100 standard Class 0 qualified, but also production automotive-grade flows. For other trigger points, contact your sales office.
illustrate
The LM26LV/LM26LVQ is a low-voltage, high-precision, dual-output, low-power temperature switch, temperature sensor. The temperature trip point (T trip) can be pre-set at the factory for any temperature range from 0°C to 150°C 1℃ Increment. The built-in temperature hysteresis (T HYST) output is stable and maintains at ambient temperature instability.
When the LM26LV/LM26LVQ temperature switch output assertion in normal operation, the temperature of the mold exceeds the T trip. When the temperature drops below a certain temperature (T Journey - T HYST), the temperature switch output will reset. The OVERTEMP digital output is positively high with the push-pull structure, while the ^OVERTEMP digital output, the low-level effective, open-drain structure.
The analog output, V temperature, provides an analog output voltage with a negative temperature coefficient (NTC).
The driving trip test input is high: (1) the digital output of the cause in-situ verification assertion, and (2) the threshold voltage V temperature output pin appears, which may be used to verify the temperature trigger point.
The LM26LV/LM26LVQ has a low supply voltage of as low as 1.8 volts and is ideal for system designs. With its wide operating range, low supply current, and excellent accuracy, it offers temperature switching solutions for a wide range of commercial and industrial applications.
Key specifications:
|
■ Supply voltage
|
1.6V to 5.5V
|
|
■ Supply current
|
8μA (typical)
|
|
■ Precision, tourist spots temperature
|
0°C to 150°C
|
± 2.2° comet
|
|
■ V temperature accuracy,
|
0°C to 150°C
|
± 2.3 ° C |
| |
0°C to 120°C
|
± 2.2° comet
|
| |
-50°C to 0°C
|
± 1.7° comet
|
|
■ V temperature output driver
|
± 100μA |
|
■ Operating temperature
|
-50°C to 150°C
|
|
■ Hysteresis temperature
|
4.5°C to 5.5°C
|
apply
- cell phone
- Wireless transceiver
- Digital camera
- Personal Digital Assistant (PDA)
- Battery management
- Car
- disk drive
- Game
- household appliance
|