LM293-EP

• Product introduction

The device consists of two independent single-supply voltage comparators designed to operate on a wider range of voltages. The action is also provided by dual supplies as long as the difference between the two is 2 V to 36 V and_CCis at least 1.5 volts more common mode than the input. The leakage current is independent of the supply voltage. These outputs can be connected to other open collector outputs for wired and relational purposes.

The LM293-EP features operation from -55°C to 125°C

characteristic

• Control baselines
  • An assembly
  • Proving ground
  • A production website
• Extended -55°C temperature to 125°C performance
• Enhanced support for decreasive manufacturing sources (DMS).
• Enhanced product change notifications
• Qualification genealogy^（1）
• Single or dual power supply
• Wide supply voltage range
  • Highest level. 。 。 2 V to 36 V
  • Test to 30 V
• Low supply current drains independently of supply voltage. 。 。 Each comparison is typically 0.4 mA
• Low input bias current. 。 。 25 nA typical
• Low input offset voltage. 。 。 2 mV typical
• The common-mode input voltage range includes ground
• The differential input voltage range is equal to the maximum voltage rating. 。 。 ± 36 volts
• Low output saturation voltage
• The outputs are compatible with TTL, MOS tubes, and CMOS

parameter