LM3495DOEMTC

• Input voltage from 2.9V to 18V
• Adjustable output voltage from 0.6V to 5.5V
• Feedback Accuracy: ± 1%
• Low-end detection with no detection resistor programmable current limit
• Enter the undervoltage lock
• Hiccup mode current limit protection eliminates thermal runaway fault conditions
• Internal soft start of tracking capabilities
• Switching frequency from 200 kHz to 1.5 MHz, synchronized
• At the gate driver of the chip
• Discharge the output on a soft shutdown
• Output pre-bias starts in
• Operate from a single input rail
• Adaptive duty cycle limit
• TSSOP - 16 package

illustrate

The LM3495 is a PWM buck regulator that implements a unique analog peak current mode control. This control method eliminates switching noise that is usually limited to very short operating cycles and high operating frequency current mode operation. Programmable switching between 200 kHz and 1.5 MHz can also be synchronized to an external clock. The LM3495 is also very forgiving with two switch nodes for short circuit, hiccup mode, and adaptive duty cycle limit protection faults. A 1% reference of 0.6V and trouble-free pre-bias start ensure reliable operation for the most demanding digital loads. The internal soft-start and tracking output capability of another power supply makes the LM3495 flexible and efficient.

apply

• Wide input voltage step-down converter, low voltage, high output accuracy
• Core logic regulator
• High-efficiency buck regulation