LM3743MMX-1000

• Input voltages from 3.0V to 5.5V
• The output voltage can be adjusted down to 0.8V
• Reference accuracy: ± 1.75% over the entire temperature and input voltage range
• High-side and low-side N-channel MOSFETs
• Switching frequency options of 1 MHz or 300 kHz
• Comprehensive Fault Protection Capabilities:

• High side current limit

• Low-end current limit

• Output undervoltage protection
• Hiccup mode protection eliminates thermal runaway fault conditions
• Externally programmable soft-start and tracking capabilities
• Pre-bias start function
• MSOP - 10 Package

illustrate

The LM3743 is a DC-DC voltage mode PWM buck controller with synchronous rectification at 300 kHz or 1 MHz. It can provide high current up to 20A and step down from 0.8V between 3V and 5.5V to an internal reference accuracy of ± 1.75% with an input voltage drop. The LM3743 provides a comprehensive set of faults such as high-side current limiting, output undervoltage protection, and low-side current limit protection. When these fail-safe functions, wherever engaged, it goes into hiccup mode, which is suitable for protecting rack high-reliability systems such as the installation of servers and telecom base station subsystems. The LM3743 also features a proprietary monolithic glitch-free pre-bias start method, ideal for FPGA and ASIC logic devices. Externally programmable soft start allows for tracking and time flexibility. The driver has a pull-up resistor and pull-down, high power density and efficiency, and very high power handling drive resistance of 1Ω to 1.6Ω.

apply

• Rack servers
• Telecom base stations
• router
• Printer/scanner
• Multimedia set-top box
• FPGAs, ASICs and DSPs