- No output filter inductive sensor requirements
- Selectable gains are 6dB or 12dB
- Very fast turn-on time: 6 ms (typical)
- Minimal external components
- "Click" sound suppression circuit
- Micropower shutdown mode
- Short-circuit protection
- Space-saving SDA package
illustrate
The LM4666 is a fully integrated single-supply high efficiency switching audio amplifier. It features an innovative modulator that eliminates the typical switching amplifier use of LC output filters. By eliminating the output filter, the number of components is reduced, the circuit design is simplified, and the board area is reduced. The LM4666 process with DELTA-sigma modulation technology reduces output noise and THD compared to the analog input of conventional pulse-width modulators.
The LM4666 is designed to meet the needs of mobile phones and other portable communication devices. Operating on a single 3V supply, it is capable of driving 8  At a continuous average output sensor of 450MW load is less than 1% THD+N. Its flexible supply requirements allow operation from 2.8V to 5.5V.
The LM4666 has been with 8 high efficiency The transducer is loaded compared to a typical Class AB amplifier. With a 3V power supply, the IC's power of 100mW is 79% efficient, reaching 450MW of output power at 84%.
The LM4666 has a low-power shutdown mode. Shutdown enables the drive shutdown pin to be logic low (GND).
The LM4666 has fixed assets or 6dB or 12dB selectable gain. The LM4666 is short to short from output to VDDor GND short-circuit protection.
Main specifications
|
At 3V, 100MW efficiency is 8 sensor
|
79% (typical) |
|
At 3V, the efficiency is 450MW at 8 sensor
|
84% (typical) |
|
The efficiency at 5V is eight x 1W sensor
|
85% (typical) |
| Total quiescent supply current |
7.0 mA (typical) |
| Total shutdown supply current |
0.02μA (typical) |
| Single supply voltage range |
2.8V to 5.5V |
apply
- mobile phone
- Pocket PC
- Portable electronic devices
|